Sorry, you need to enable JavaScript to visit this website.
Skip to main content

IE PhD Program Performance

Number of Enrolled Students

Year Number of Enrolled PhD Students
2018-2019  
2019-2020  
2020-2021  

 

Number of Graduate Students

Year Number of Graduate PhD Students
2018-2019  
2019-2020  
2020-2021  

 

Achievements of the Industrial Engineering PhD Program_ List of Publications

 

Publications of PhD Students in the Academic Year 2020-2021

Researches Published Through Research Groups

No.

Publications

1.

Kashif Ishfaq, Muhammad Asad, Saqib Anwar, Catalin Pruncu, Mustafa Saleh, Shafiq Ahmad, 2020, A comprehensive Analysis of the effect of graphene-based dielectric for sustainable EDM of Ti-6Al-4V, Materials, 14, 1-24.

2.

Mohammed A. Noman, Emad S. Abouel Nasr, Adel Al-Shayea, Fawaz M. Abdullah, Husam Kaid, Mohammed Alnahari, 2020, A systematic literature review on applications of condition-based maintenance strategy, International Journal of Collaborative Enterprise, 6, 105-133.

3.

N Ahmed, AU Rehman, K Ishfaq, R Naveed, Khaja Moiduddin, Usama Umer, Adham E Ragab and Ayoub Al-Zabidi, 2020, Achieving the Minimum Roughness of Laser Milled Micro-Impressions on Ti 6Al 4V, Inconel 718, and Duralumin, Materials, 13, 4523.

4.

A Al-Zabidi, AU Rehman, M Alkahtani, 2021, An Approach to Assess Sustainable Supply Chain Agility for a Manufacturing Organization, Sustainability, 13, 1752.

5.

Alkahtani, M., Ziout, A., Salah, B., Alatefi, M., Elgawad, A. E. E. A., Badwelan, A., & Syarif, U, 2021, An Insight into Reverse Logistics with a Focus on Collection Systems, sustainability, 13, 548.

6.

Mrad, M., Suryahatmaja, U.S., Yaghlane, A.B. and Azaiez, M.N., 2021, Attack Strategies on Networks with a Budget Constraint., IEEE Access, 9, 100530-100547.

7.

H Kaid, A Al-Ahmari, Z Li, W Ameen, 2021, Deadlock Control and Fault Detection and Treatment in Reconfigurable Manufacturing Systems Using Colored Resource-Oriented Petri Nets Based on Neural Network, IEEE Access, 9, 84932.

8.

Dabwan, S. Anwar, A. M. Al-Samhan, A. Alfaify, and M. M. Nasr, 2021, Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L, Materials, 7, 1797.

9.

M. M. Nasr, S. Anwar, A. M. Al-Samhan, M. Ghaleb, and A. Dabwan, 2020, Milling of graphene reinforced Ti6Al4V nanocomposites: An artificial intelligence based industry 4.0 approach, Materials, 13, 1-22.

10.

Dabwan, A., Ragab, A. E., Saleh, M. A., Ghaleb, A. M., Ramadan, M. Z., Mian, S. H., & Khalaf, T. M., 2021, Multiobjective optimization of process variables in single-point incremental forming using grey relational analysis coupled with entropy weights, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 29, 14644207211020400.

11. M. M. Nasr, S. Anwar, A. M. Al-Samhan, H. S. Abdo, and A. Dabwan, 2020, On the machining analysis of graphene nanoplatelets reinforced Ti6Al4V matrix nanocomposites, Journal of Manufacturing Processes, 61,  574-589.
12. Osama Abdulhameed, Abdulrahman Al-Ahmari, Syed Hammad Mian and Mohamed K. Aboudaif, 2020, Path Planning and Setup Orientation for Automated Dimensional Inspection Using Coordinate Measuring Machines, Mathematical Problems In Engineering.
13. Khalaf TM, Ramadan MZ, Ragab AE, Alhaag MH, AlSharabi KA , 2021, Psychophysiological responses to manual lifting of unknown loads, PLoS ONE, 16, e0247442.
14. Adel M. Al-Shayea, Mustafa Saleh, Moath Alatefi and Mageed Ghaleb, 2020, Scheduling Two Identical Parallel Machines Subjected to Release Times, Delivery Times and Unavailability Constraints, Processes, 8, 1025.

Researches Published Through Research Projects

No. Publications

1.

MA Noman, A AL-Shayea, EA Nasr, H Kaid, 2021, A Model for Maintenance Planning and Process Quality Control Optimization Based on EWMA and CUSUM Control Charts, Transactions of FAMENA, 45, 95-116.

2.

Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, Mohammed A. Noman, and Haitham A. Mahmoud, 2020, Petri Net Model Based on Neural Network for Deadlock Control and Fault Detection and Treatment in Automated Manufacturing Systems, IEEE Access, 8, 103219 - 103235.

3.

Adel Al-Shayea, Fawaz M. Abdullah, Mohammed A. Noman, Husam Kaid, and Emad Abouel Nasr, 2020, Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel, Advances in Materials Science and Engineering, 2020, 5480614.

4.

Mehdi Mrad, Khaled Bamatraf, Mohammed Alkahtani and Lotfi Hidri, “Genetic Algorithm Based on Clark & Wright’s Savings Algorithm for Reducing the Transportation Cost in a Pooled Logistic System”  Proceedings of the International Conference on Industrial Engineering and Operations Managemen,  Proceedings of the International Conference on Industrial Engineering and Operations Management Sao Paulo, Brazil, April 5-8, 2021.

5.

Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, and Haitham A. Mahmoud, “Supervisor Controller-Based Elementary Siphons and Colored Petri Net for Deadlock Control and Machine Failures in Automated Manufacturing Systems”, The International Conference on Industrial Engineering and Operations Management, Sao Paulo, Brazil, April 5-8, 2021.

Individual Researches

No. Publications

1.

Hidri, L., Gazdar, A., & M Mabkhot, M. , 2020, Optimized Procedure to Schedule Physicians in an Intensive Care Unit: A Case Study, Mathematics, 8, 1976.

2.

A Al-Ahmari, SH Mian, W Ameen, 2021, Performance assessment of fused deposition modeling process, Journal of Engineering Research, 9.

 

 

Publications of PhD Students in the Academic Year 2019-2020

Researches Published Through Research Groups

No.

Publications

1.

MM Mabkhot, S Darmoul, AM Al-Samhan, A Badwelan, 2020, A Multi-Criteria Decision Framework Considering Different Levels of Decision-Maker Involvement to Reconfigure Manufacturing Systems, Machines, 8, 8.

2.

Mohamed A. Mohamed, Elham Tajik, Emad Mahrous Awwad, Ahmed M. El-Sherbeeny, et al. , 2020, A two-stage stochastic framework for effective management of multiple energy carriers, Energy , 197, 117170, Q1, IF 6.082.

3.

MM Mabkhot, SK Amri, S Darmoul, AM Al-Samhan, S Elkosantini, , 2020, An ontology-based multi-criteria decision support system to reconfigure manufacturing systems, IISE Transactions, 52, 18-42, Q3, IF 1.579.

4.

AM Ghaleb, H Kaid, A Alsamhan, SH Mian, L Hidri, 2020, Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process, Advances in Materials Science and Engineering, 2020, , Q4, IF 1.271.

5.

Atef M. Ghaleb, Husam Kaid, Ali Alsamhan, Syed Hammad Mian, and Lotfi Hidri, 2020, Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process, Advances in Materials Science and Engineering, 2020, 4039253, Q4, IF 1.271.

6.

Ateekh Ur Rehman, Ayoub Al-Zabidi, Mohammed AlKahtani, Usama Umer and Yusuf Siraj Usmani , 2020, Assessment of Supply Chain Agility to Foster Sustainability: Fuzzy-DSS for a Saudi  Manufacturing Organization, Processes, 8, 755, Q2, IF 2.576.

7.

Atef M. Ghaleb & Mohamed Z. Ramadan & Ahmed Badwelan, Lamjed Mansour, Jameel Al-Tamimi and Khalid Saad Aljaloud , 2020, Determining the time needed for workers to acclimatize to hypoxia, International Journal of Biometeorology, , 11, Q2, IF 2.68.

8.

Atef M. Ghaleb & Mohamed Z. Ramadan & Ahmed Badwelan, Lamjed Mansour, Jameel Al-Tamimi and Khalid Saad Aljaloud, 2020, Effect of hypoxia, safety shoe type, and lifting frequency on the subject’s cardiovascular and ventilation responses, International Journal of Industrial Ergonomics, 2020, 11, Q3, IF 1.662.

9.

Mehdi Mrad, Khalid S. Al-Gahtani, Rahmeto Hulchafo, Nizar Souayah  and Khaled Bamatraf  (2019) " Risk Assessment for Discrete Stochastic Time-Cost-Quality Trade-Off Problem Using Simulation-Based Integer Linear.

10.

Atif Khan, Ibrahim Ibrahim, M. Irfan Uddin, Muhammad Zubair, Shafiq Ahmad, Muhammad Dzulqarnain Al Firdausi, Mazen Zaindin, 2020, Machine Learning Approach for Answer Detection in Discussion Forums: an Application of Big Data Analytics, Scientific Programming, 2020, 1 to 10, Q3, IF 1.289.

Researches Published Through Research Projects

No. Publications

1.

Emad Abouel Nasr, Abdulrahman Al-Ahmari, Awais A. Khan, Syed Hammad Mian, Osama Abdulhameed & Ali Kamrani, , 2020, Integrated system for automation of process, fixture and inspection planning, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 10, Q3, IF 1.755

2.

Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, Mohammed A. Noman, Haitham A. Mahmoud, 2020, Petri net Model Based on Neural Network for Deadlock Control and Fault Detection and Treatment in Automated Manufacturing Systems, IEEE Access, 8, 103219-103235, Q1, IF 3.745.

Individual Researches

No. Publications

1.

Atef M. Ghaleb, Tamer M. Khalaf , Mohamed Z. Ramadan, Adham E. Ragab and Ahmed Badwelan, 2020, Effect of Cycling on a Stationary Bike While Performing Assembly Tasks on Human Physiology and Performance Parameters, International journal of environmental research and public health, 17, 1761, Q2, IF 2.849.

2.

Fares F. Alferdaws and Mohamed Z. Ramadan, 2020, Effects of Lifting Method, Safety Shoe Type, and Lifting Frequency on Maximum Acceptable Weight of Lift, Physiological Responses, and Safety Shoes Discomfort Rating, International journal of environmental research and public health, 17, 3012, Q2, IF 2.849.

3.

Kaid, H., Al-Ahmari, A., Li, Z., & Davidrajuh, R, 2020, Intelligent Colored Token Petri Nets for Modeling, Control, and Validation of Dynamic Changes in Reconfigurable Manufacturing Systems., Processes, 8, 358, Q2, IF 2.753.

4.

Mohammed Alkahtani, Shafiq Ahmad, Mohammed A. Noman and Husam Kaid, Ahmed Badwelan , 2020, International Journal of Industrial and Systems Engineering, International Journal of Industrial and Systems Engineering, 35, 314--344.

5.

Basem M. A. Abdo, Abdualziz El-Tamimi and Emad Abouel Nasr, 2020, Rotary Ultrasonic Machining of Alumina Ceramic: An Experimental Investigation of Tool Path and Tool Overlapping, Applied Sciences Basel, 10, 21, Q2, IF 2.474.

6.

AM Al-Shayea, M Saleh, M Alatefi, M Ghaleb, 2020, Scheduling Two Identical Parallel Machines Subjected to Release Times, Delivery Times and Unavailability Constraints,, Processes, 8, 1025-1044, Q2, IF 2.576.

7.

Al-Ahmari, A., Kaid, H., Li, Z., & Davidrajuh, R., 2020, Strict Minimal Siphon-Based Colored Petri Net Supervisor Synthesis for Automated Manufacturing Systems With Unreliable Resources, IEEE Access, 8, 22411-22424., Q1, IF 3.745.

8.

Abdulmajeed Dabwan , Adham E. Ragab , Mohamed A. Saleh, Saqib Anwar, Atef M. Ghaleb and Ateekh Ur Rehman , 2020, Study of the Effect of Process Parameters on Surface Profile Accuracy in Single-Point Incremental Sheet Forming of AA1050-H14 Aluminum Alloy, Advances in Materials Science and Engineering, 2020, 14, Q4, IF 1.271.

9.

Adel Al-Shayea, Fawaz M. Abdullah, Mohammed A. Noman, Husam Kaid and Emad Abouel Nasr, 2020, Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel, Advances in Materials Science and Engineering, 2020,  15, Q4, IF 1.271.

10. Ramadan, M. Z., Ghaleb, A. M., & Ragab, A. E. , 2020, Using electroencephalography (EEG) power responses to investigate the effects of ambient oxygen content, safety shoe type, and lifting frequency on the worker’s activities, BioMed Research International, 2020, , Q3, IF 2.276.

 

 

 

Publications of PhD Students in the Academic Year 2018-2019

Researches Published Through Research Groups

No.

Publications

1.

Ali Ahmad, Mageed Ghaleb, Saber Darmoul, Mohammed Alkahtani, and Shatha Samman , 2019, A combined multitasking performance measure involving sequential and parallel task executions, Cognition, Technology & Work, , 12, Q4, IF 1.206.

2.

Saqib Anwar, Fawaz M. Abdullah, Mohammed S. Alkahtani, Shafiq Ahmad, Moath Alatefi , 2019, Bibliometric Analysis of Abrasive Water Jet Machining, Research, Journal of King Saud University - Engineering Sciences, 31, 262-270.

3.

Kaid, H., Al-Ahmari, A., El-Tamimi, A. M., Nasr, E. A., & Li, Z., 2019, Design and Implementation of Deadlock Control for Automated Manufacturing Systems, South African Journal of Industrial Engineering, 30, 21, Q4, IF 0.488.

4.

Mohamed Z. Ramadan, Mustafa M. Nasr, Abdulmajeed A. Dabwan, Tamer M. Khalaf,Mohammed H. Alhaag, Ahmed T. Soliman, Abdelaty E. Abdelgawad , 2019, Evaluation of holding handheld scanner on muscle activity, heart rate variability, and model accuracy in industrial applications, International Journal of Industrial Ergonomics, 74, 102873, Q3, IF 1.662.

5.

Umer, U., Ameen, W., Abidi, M. H., Moiduddin, K., Alkhalefah, H., Alkahtani, M., & Al-Ahmari, A. , 2019, Modeling the Effect of Different Support Structures in Electron Beam Melting of Titanium Alloy Using Finite Element Models, Metals, 9, 806, Q2, IF 2.117.

6.

Ali Alsamhan, Adham E. Ragab, Abdulmajeed Dabwan ,Mustafa M. Nasr, Lotfi Hidri , 2019, Prediction of formation force during single-point incremental sheet metal forming using artificial intelligence techniques, PLOS ONE, 14 (8), e0221341, Q2, IF 2.74.

7.

Adel AL-SHAYEA, Abdulmajeed DABWAN, Adham E RAGAB, Mustafa M. NASR, Husam KAID, 2019, Studying the Effect of Process Parameters on Part Depth in Single Point Incremental Forming of AA1050-H14 Aluminum Alloy Sheets, Technical Gazette, 6, 1606-1613, Q4, IF 0.67.

8.

Salah, Bashir., Abidi, M., Mian, S., Krid, M., Alkhalefah, H., Abdo, A., (2019) "Virtual Reality Based Engineering Education to Enhance Manufacturing Sustainability in Industry 4.0" Sustainability.

9.

Mehdi Mrad, Khalid S. Al-Gahtani, Rahmeto Hulchafo, Nizar Souayah  and Khaled Bamatraf  (2019) " Risk Assessment for Discrete Stochastic Time-Cost-Quality Trade-Off Problem Using Simulation-Based Integer Linear.

10.

Basem M. A. Abdo, Saqib Anwar, Abdulaziz M. El-Tamimi, and Emad Abouel Nasr,      (2019)"Experimental Analysis on the Influence and Optimization of μ-RUM Parameters in Machining Alumina Bioceramic", Materials (Basel), Vol. 12, No. 4. pp. 616.

11.

Shahid Bashir, Shafiq Ahmad, Moath Alatefi, Ali Hamza, Mohamed Sharaf, Shirely Fecteau & Woo Kyoung Yoo (2019), Effects of anodal transcranial direct current stimulation on motor evoked potentials variability in humans.

12.

Mohammed M. Mabkhot , Sana Kouki Amri , Saber Darmoula , Ali M. Al-Samhana , and Sabeur Elkosantinia, 2019, An ontology based multi criteria decision support system to reconfigure manufacturing systems.

13.

Ghaleb, A. M., Saleh, M. A., Ragab, A. E., Dabwan, A., Khalaf, T. M., & Umer, U. (2019). A new method to produce T-shaped tubular fittings with experimental and simulation results.

14.

Alkahtani MS, El-Sherbeeny AM, Al-Marfadi A, and Abdullah FM. (2019). “A Panoramic View of Industrial Engineering: The Case of Saudi Arabia.”

Researches Published Through Research Projects

No. Publications

1.

Kaid, H., Al-Ahmari, A., El-Tamimi, A. M., Nasr, E. A., & Li, Z., 2019, Design and Implementation of Deadlock Control for Automated Manufacturing Systems, South African Journal of Industrial Engineering, 30, 21, Q4, IF 0.488.

2.

Basem M. A. Abdo, Naveed Ahmed, Abdulaziz M. El-Tamimi, Saqib Anwar, Hisham Alkhalefah, Emad Abouel Nasr, (2019) "Laser Beam Machining of Zirconia Ceramic: An Investigation of Micromachining Geometry and Surface Roughness.

3.

ADEL AL-SHAYEA, MOHAMMED A. NOMAN, EMAD ABOUEL NASR, HUSAM KAID , ALI K. KAMRANI, AND ABDULAZIZ M. EL-TAMIMI, 2019, New Integrated Model for Maintenance Planning and Quality Control Policy for Multi-Component System Using an EWMA Chart, IEEE Access , 7, 160623-160636, Q1, IF 3.745.

Individual Researches

No. Publications

1.

Mohammed M. Mabkhot,A. M. Al-Samhan, Lotfi Hidri, 2019, An Ontology-Enabled Case-Based Reasoning Decision Support System for Manufacturing Process Selection, Advances in Materials Science and Engineering, 2019,  ID 2505183, Q4, IF 1.271.

2.

L. Hidri, A. M. Al-Samhan and M. M. Mabkhot, 2019, Bounding Strategies for the Parallel Processors Scheduling Problem With No-Idle Time Constraint, Release Date, and Delivery Time, IEEE Access, 7, 170392-170405, Q1, IF 3.745.

3.

Atef M. Ghaleb, Mohamed Z. Ramadan, Khalid Saad Aljaloud , 2019, Effect of Ambient Oxygen Content and Lifting Frequency on the Participant’s Lifting Capabilities, Muscle Activities, and Perceived Exertion, International Journal of Health and Medical Engineering, 13, 489-493.

4.

Atef M. Ghaleb, Mohamed Z. Ramadan, Ahmed Badwelan and Khalid Saad Aljaloud , 2019, Effect of Ambient Oxygen Content, Safety Shoe Type, and Lifting Frequency on Subject’s MAWL and Physiological Responses, International journal of environmental research and public health, 16, 4172, Q2, IF 2.849.

5.

Moath Alatefi, Shafiq Ahmad, Mohammed Alkahtani, 2019, Performance Evaluation Using Multivariate Non-Normal Process Capability, Processes, 7, 1 to 24, Q2, IF 2.753.

6.

Kaid, H., Al-Ahmari, A., Li, Z., & Davidrajuh, R., 2019, Single Controller-Based Colored Petri Nets for Deadlock Control in Automated Manufacturing Systems, Processes, 8, 21, Q2, IF 2.753.

7.

Abdo B.M.A., Anwar S., & El-Tamimi A.M. (2019). ‘Machinability study of biolox forte ceramic by milling microchannels using rotary ultrasonic machining’.

8.

Mohammed Mabkhot , Ali M. Al-Samhan, Lotfi Hidri, (2019), “An Ontology-Enabled Case-Based Reasoning Decision Support System for Manufacturing Process Selection”.

 

 

 

Achievements of the Industrial Engineering PhD Program_ The List of Theses

 

No. Thesis Title

1.

Task and Environment Effect on Lifting Capabilities While Wearing Safety Shoes.

2.

An lntegrated System for Automatic Computer-Aided Fixture design.

3.

Developing an Artificial Neural Network Model to Predict Dimensions Based on Anthropometric Database.

4.

A Hybrid Process to Strengthen the Laser Ablation Competencies by Fluidly Immersed Laser Machining FILM.

5.

Solving Nurse Scheduling Problem Using Exact and Heuristic Approaches.
6.

Contributions of Factors on Generating Uunsafe Acts at Workplace Whilst Implementing Safe Work Instruction.

7.

Hybrid Process for Precision Micromachining of Biomedical Materials.

8.

Development of a CAPP System for Prismatic Parts in Hybrid Manufacturing.

9.

Effect of Ambient Oxygen Content Safety Shoes Type and Lifting Frequency on Workers Lifting Capabilities and Physiological Responses.

10.

Investigation of Precision Task Demands on Workers Lifting and Carrying Capabilities While Wearing Safety Shoes.

11.

Design of Support Structures in Additive Manufacturing Technology.

12.

Case-based Reasoning to Reconfigure Manufacturing Systems.