Journals and Conferences Publications

Journals Publications 2020-2021

Sn	Publications
1	Al-Tamimi AA., 2021, 3D Topology Optimization and Mesh Dependency for Redesigning Locking Compression Plates Aiming to Reduce Stress Shielding, International Journal of Bioprinting, 7, 153-162.
2	Korbi, M. Tlija, and B. Louhichi., 2021, A CAD model for the tolerancing of mechanical assemblies considering non-rigid joints between parts with defects, Journal of Engineering Manufacture , 0, 9544054211025770.
3	Kashif Ishfaq, Muhammad Asad, Saqib Anwar, Catalin Pruncu, Mustafa Saleh, Shafiq Ahmad, 2020, A comprehensive Analysis of the effect of graphene-based dielectric for sustainable EDM of Ti-6Al-4V, Materials, 14, 1-24.
4	Ishfaq, K., Farooq, M. U., Anwar, S., Ali, M. A., Ahmad, S., & M. El-Sherbeeny, A., 2020, A comprehensive investigation of geometrical accuracy errors during WEDM of Al6061-7.5%SiC composite, Materials And Manufacturing Processes, 36, 362-372.
5	Mohammad Alkahtani,Qazi salman, Muhannad Jalees, Muhammad Qmair, 2021, A COVID-19 Supply Chain Management Strategy Based on Variable Production under Uncertain Environment Conditions, Int. J. Environ. Res. Public Health , 18, 1 to 21.
6	MA Noman, A AL-Shayea, EA Nasr, H Kaid, 2021, A Model for Maintenance Planning and Process Quality Control Optimization Based on EWMA and CUSUM Control Charts, Transactions of FAMENA, 45, 95-116.f
7	Firoz Ahmad, Shafiq Ahmad, Mazen Zaindin, Ahmad Yusuf Adhami, 2021, A Robust Neutrosophic Modeling and Optimization Approach for Integrated Energy-Food-Water Security Nexus Management under Uncertainty, Water, 13, 1-26.
8	Firoz Ahmad, Shafiq Ahmad, Mazen Zaindin, 2021, A Sustainable Production and Waste Management Policies for COVID-19 Medical Equipment under Uncertainty: A Case Study Analysis,, Computers & Industrial Engineering, 157, 1-27.
9	Mohammed A. Noman, Emad S. Abouel Nasr, Adel Al-Shayea, Fawaz M. Abdullah, Husam Kaid, Mohammed Alnahari, 2020, A systematic literature review on applications of condition-based maintenance strategy, International Journal of Collaborative Enterprise, 6, 105-133.
10	N Ahmed, AU Rehman, K Ishfaq, R Naveed, Khaja Moiduddin, Usama Umer, Adham E Ragab and Ayoub Al-Zabidi, 2020, Achieving the Minimum Roughness of Laser Milled Micro-Impressions on Ti 6Al 4V, Inconel 718, and Duralumin, Materials, 13, 4523.
11	Masood Ahmad, Abdul Hameed, Fasee Ullah, Ishtiaq Wahid,  Atif Khan,  M. Irfan Uddin, Shafiq Ahmad, Ahmed M. El-Sherbeeny, 2021, Adaptation of Efficient Clustering Protocol in Environment Aware Vehicular Ad Hoc Networks for Smart Transportation, CMC-Computers, Materials & Continua, 67, 1353–1368.
12	Masood Ahmad, Abdul Hameed, Fasee Ullah, Ishtiaq Wahid, Atif Khan, M. Irfan Uddin, Shafiq Ahmad, Ahmed M. El-Sherbeeny, 2021, Adaptation of Vehicular Ad hoc Network Clustering Protocol for Smart Transportation, CMC-COMPUTERS MATERIALS & CONTINUA, 67, 1353-1368.
13	Montasser Billah, Mehdi Tlija, and Borhen Louhichi, 2020, An Approach of CAD/CAM Data Reuse for Manufacturing Cost Estimation, International Journal of Computer Integrated Manufacturing, 33, 1208-1226.
14	A Al-Zabidi, AU Rehman, M Alkahtani, 2021, An Approach to Assess Sustainable Supply Chain Agility for a Manufacturing Organization, Sustainability, 13, 1752.
15	Alkahtani, M., Ziout, A., Salah, B., Alatefi, M., Elgawad, A. E. E. A., Badwelan, A., & Syarif, U, 2021, An Insight into Reverse Logistics with a Focus on Collection Systems, Sustainability, 13, 548.
16	N.A.Saeed, Emad Mahrous Awwad,MA El-Meligy and  Emad Abouel Nasr, 2021, Analysis of the rub-impact forces between a controlled nonlinear rotating shaft system and the electromagnet pole legs, Applied Mathematical Modelling, 93, 792-810.
17	G.Hussain, Mohammed Alkahtani, 2021, Analysis of wall curling in incremental forming of a sheet metal: role of residual stresses, stretching force and process conditions, Journal of Materials Research and Technology, 11, 1548 -58.
18	Khan Aquib Mashood, Zaho,Wei,Li,Liang, Mohammed Alkahtani, 2021, Assessment of cumulative energy demand, production cost, and CO2 emission from hybrid CryoMQL assisted machining, JOURNAL OF CLEANER PRODUCTION , 292, 125952-68.
19	Mrad, M., Suryahatmaja, U.S., Yaghlane, A.B. and Azaiez, M.N., 2021, Attack Strategies on Networks with a Budget Constraint., IEEE Access, 9, 100530-100547.
20	Anil Kumar Gulivindala, M. V. A. Raju Bahubalendruni, R. Chandrasekar, Ejaz Ahmed,  R. Chandrasekar, Mustufa Haider Abidi and Abdulrahman Al-Ahmari, 2021, Automated Disassembly Sequence Prediction for Industry 4.0 Using Enhanced Genetic Algorithm, CMC-COMPUTERS MATERIALS & CONTINUA, 69, 2531.
21	Hamza Mumtaz, M. Farhan, M. Amjad, Fahid Riaz, Ali H. Kazim, M. Sultan, M. Farooq, M.A. Mujtaba, I. Hussain, M. Imran, Saqib Anwar, Ahmed M. El-Sherbeeny, Farrukh A. Siddique, Stevan Armaković, Qasim Ali, Ijaz A. Chaudhry, Alberto Pettinau, 2021, Biomass waste utilization for adsorbent preparation in CO2 capture and sustainable environment applications, Sustainable Energy Technologies and Assessments, 46, 101288.
22	Jemmali, M. and Hidri, L., 2021, Bounding schemes for the parallel machine scheduling problem with Dejong's learning effect, Journal of Parallel and Distributed Computing, 156, 101-118.
23	Korbi, M. Tlija, and B. Louhichi, 2021, CAD / Tolerancing Integration: A Novel Tolerance Analysis Model of Assemblies with Composite Positional Defects and Deformations of Nonrigid Parts, J. Manuf. Sci. Eng. , 143, 081012.
24	Shoeb Ahmad Khan, Shafiq Ahmad, Adil Sarwar, Mohd Tariq, Javed Ahmad, Mohammed Asim, Ahmed T. Soliman and Md. Alamgir Hossain, 2021, Chaos Induced Coyote Algorithm (CICA) for Extracting the Parameters in a Single, Double, and Three Diode Model of a Mono-Crystalline, Polycrystalline, and a Thin-Film Solar PV Cell, Electronics, 10, 1-35.
25	Alabdulkarem, A.; Alhojailan, M.; Alabdulkarim, S. , 2021, Comprehensive Investigation of Factors Influencing University Students’ Academic Performance in Saudi Arabia, Education Sciences, 11, 375.
26	Ashraf, W. M., Uddin, G. M., Farooq, M., Riaz, F., Ahmad, H. A., Kamal, A. H., Anwar, S., El-sherbeeny, A. M., Khan, M. H., Hafeez, N., Ali, A., Samee, A., Naeem, M. A., Jamil, A., Hassan, H. A., Muneeb, M., Chaudhary, I. A., & Sosnowski, M., 2021, Construction of Operational Data-Driven Power Curve of a Generator by Industry 4.0 Data Analytics, Energies, 14, 1227.
27	H Kaid, A Al-Ahmari, Z Li, W Ameen, 2021, Deadlock Control and Fault Detection and Treatment in Reconfigurable Manufacturing Systems Using Colored Resource-Oriented Petri Nets Based on Neural Network, IEEE Access, 9, 84932.
28	Alfaify, A., Saleh, M., Abdullah, F.M. and Al-Ahmari, A.M., 2020, Design for Additive Manufacturing: A Systematic Review, Sustainability, 12, 7936.
29	Rizwana Irfan, Abdulwahab Ali Almazroi, Hafiz Tayyab Rauf, Robertas Damaševičius , Emad Abouel Nasr and Abdelatty E. Abdelgawad, 2021, Dilated Semantic Segmentation of Ultrasonic Breast Modality through Parallel Feature Fusion, Diagnostics, 11, 43831.
30	Basingab, M., Nagadi, K., Rahal, A., Bukhari, H. and Alasim, F., 2020, Distributed Simulation Using Agents for the Internet of Things and the Factory of the Future, Information , 11, 458.
31	Syed Waqar Azeem, Kashif Mehmood, Khalid Mehmood Cheema, Muhammad Faizan Tahir, Ahmed M. El-Sherbeeny, 2021, Dual-transformer-based hybrid resonant three-level ZCS converter, Energy Reports, 7, 421-429.
32	Mohammad Alkahtani,Qazi salman, Muhannad Jalees, Muhammad Qmair, 2021, E-Agricultural Supply Chain Management Coupled with Blockchain Effect and Cooperative Strategies, Sustainability , 13, 1 to 29.
33	Mohamed Iqbal Shajahan, Jee Joe Michael, M. Arulprakasajothi , Sivan Suresh, Emad Abouel Nasr and H. M. A. Hussein, 2020, Effect of Conical Strip Inserts and ZrO2/DI-Water Nanofluid on Heat Transfer Augmentation: An Experimental Study, Energies, 13, 4554.
34	M Baig, AU Rehman, JA Mohammed, AH Seikh, 2021, Effect of Microstructure and Mechanical Properties of Al5083 Alloy Processed by ECAP at Room Temperature and High Temperature, Cryatals, 11, 683.
35	AH Seikh, M Baig, A Ur Rehman, 2020, Effect of Severe Plastic Deformation, through Equal-Channel Angular Press Processing, on the Electrochemical Behavior of Al5083 Alloy, Applied Sciences, 10, 7776.
36	El-Sherbeeny, A.M., Ibrahim, S.M., AlHammadi, A.A., Soliman, A.T.A., Shim, J.J. and Abukhadra, M.R., 2021, Effective retention of radioactive CsC and Ba2C ions using  -cyclodextrin functionalized diatomite ( -CD/D) as environmental adsorbent; characterization, application, and safety, Surfaces and Interfaces, 2021, 101434.
37	Alabdulkarim, S.A.; Farhan, A.M.; Ramadan, M.Z. Effects of a Wearable Carriage Aid on Whole-Body Physiological Measures and Balance. Appl. Sci. 2020, 10, 8076., 2020, Effects of a Wearable Carriage Aid on Whole-Body Physiological Measures and Balance, Applied Sciences , 10, 8076.
38	M. S. AlSalhi, V. Masilamani, N. Alarifi, W. A. Farooq, M. Atif, S. Ramay, H. S. Althobaiti, S. Anwar, I. Elkhedr, and B. A. Abuamarah, 2021, Elemental composition and physical characteristics of the massive meteorite of the Saudi empty quarter, Journal of King Saud University-Science, 33, 101341.
39	Eliezer Zahid, Tahir Abdual, G.Hussain Mohammed Alkahtani, 2020, Energy, exergy, exergo-economic and exergo-environmental analyses of solar based hydrogen generation system, international journal of hyderogen energy , 46, 29049 -64.
40	Khan, A.M., Anwar, S., Gupta, M.K., Alfaify, A., Hasnain, S., Jamil, M., Mia, M. and Pimenov, D.Y., 2020, 2020, Energy-Based Novel Quantifiable Sustainability Value Assessment Method for Machining Processes, Energies.
41	Mostafa R. Abukhadra, Ali AlHammadi, Ahmed M. El-Sherbeeny, Mohamed Abdel Salam, Mohammed A. El-Meligy, Emad Mahrous Awwad, Monis Luqman,, 2021, Enhancing the removal of organic and inorganic selenium ions using an exfoliated kaolinite/cellulose fibres nanocomposite, Carbohydrate Polymers, 252, 117163.
42	Sosa, E. M., & Alessa, F. M. , 2021, Experimental evaluation of protected and unprotected hands under impact loading, Journal of biomechanics, 118, 110326.
43	Asim Ahmad, Riaz Muhammad, Naveed Ullah, G.Hussain, Mohammad Alkahtani, 2021, Fuzzy Logic-Based Prediction of Drilling-Induced Temperatures at Varying Cutting Conditions along with Analysis of Chips Morphology and Burrs Formation, Metals MDPI, 11, 1 to 18.
44	Shafiq Ahmad, Khalid Alnowibet, Latifah Alqasem, Jose M. Merigo, Mazen  Zaindin , 2021, Generalized OWA operators for uncertain queuing modeling with application in healthcare, Soft Computing, 25, 4951-4962.
45	Hidri, L.; Alqahtani, A.; Gazdar, A.; Ben Youssef, B., 2021, Green Scheduling of Identical Parallel Machines with Release Date, Delivery Time and No-Idle Machine Constraints, Sustainability, 13, 927.
46	Khalid Alnowibet, Adel Abduljabbar, Shafiq Ahmad, Latifah ALqasem, Nabil Alrajeh, Luigi Guiso, Mazin Zaindin, Madhusudhan Varanasi, 2021, Healthcare Human Resources: Trends and Demand in Saudi Arabia, Healthcare, 9, 1-14.
47	N Ahmed, MA Naeem, AU Rehman, M Rafaqat, Usama Umer and Adham E. Ragab , 2020, High Aspect Ratio Thin-Walled Structures in D2 Steel through Wire Electric Discharge Machining (EDM), Micromachines, 12, 1.
48	Aqib Mashood khan, Ghulam Hussain, Mohammed Alkahtani, Ayoub alzabidi, 2020, Holistic sustainability assessment of hybrid Al–GnP-enriched nanofluids and textured tool in machining of Ti–6Al–4V alloy, The International Journal of Advanced Manufacturing Technology , 112, 731-743.
49	Adeleye, A. A., Alabdulkarim, S. A., & Nussbaum, M. A. , 2020, Impacts of different fabric scissor designs on physical demands and performance in simulated fabric cutting tasks, Applied Ergonomics, 89, 103219.
50	Rahman, M.A., Bhuiyan, M.S., Sharma, S., Kamal, M.S., Imtiaz, M.M., Alfaify, A., Nguyen, T.T., Khanna, N., Sharma, S., Gupta, M.K. and Anwar, S.,, 2021, Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy, Metals.
51	S. Anwar, A. U. Rehman, Y. Usmani, and A. M. Al-Samhan, 2021, Influence of Post Weld Heat Treatment on the Grain Size, and Mechanical Properties of the Alloy-800H Rotary Friction Weld Joints, Materials, 14, 4366.
52	Mostafa R. Abukhadra, Ahmed M. El-Sherbeeny, Mohammed A. El-Meligy, Monis Luqman,, 2021, Insight into carbohydrate polymers (chitosan and 2- hydroxyethyl methacrylate/methyl methacrylate) intercalated bentonite-based nanocomposites as multifunctional and environmental adsorbents for methyl parathion pesticide, International Journal of Biological Macromolecules, 167, 335-344.
53	Hidri, L., Alqahtani, K., Gazdar, A. and Badwelan, 2021, Integrated Scheduling of Tasks and Preventive Maintenance Periods in a Parallel Machine Environment With Single Robot Server, IEEE Access, 9, 74454-74470.
54	Ijaz, M., Li, G., Wang, H., El-Sherbeeny, A. M., Awelisah, Y. M., Lin, L., Koubaa, A., & Noor, A., 2020, Intelligent Fog-Enabled Smart Healthcare System for Wearable Physiological Parameter Detection, Electronics, 9, 2015.
55	Basharat Hussain, Muhammad Khalil Afzal, Shafiq Ahmad,  Almetwally M. Mostafa , 2021, Intelligent Traffic Flow Prediction Using Optimized GRU Model, IEEE Access, 9, 100736-100746.
56	Joynal Abedin, Shamim Mahbub, Mohammad Majibur Rahman, Anamul Hoque, Dileep Kumar, Javed Masood Khan, Ahmed M. El-Sherbeeny,, 2021, Interaction of tetradecyltrimethylammonium bromide with bovine serum albumin in different compositions: Effect of temperatures and electrolytes/urea, Chinese Journal of Chemical Engineering, 29, 279-287.
57	N. S. Ross, S. Nimel, G. Manimaran, S. Anwar, M. A. Rahman, M. E. Korkmaz, M. K. Gupta, A. Alfaify, M. Mia, 2021, Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication, Tribology International, 155, 106762.
58	Dabwan, S. Anwar, A. M. Al-Samhan, A. Alfaify, and M. M. Nasr, 2021, Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L, Materials, 7, 1797.
59	Fazli Subhan, Sajid Saleem, Haseeb Bari, Wazir Zada Khan, Saqib Hakak, Shafiq Ahmad, Ahmed M. El-Sherbeeny , 2020, Linear Discriminant based Dynamic Indoor Localization using Bluetooth Low Energy (BLE), , Sustainability, 12, 1-12.
60	Muhammad Sohaib Aslam, Muhammad Younas, Muhammad Umar Sarwar, Muhammad Arif Shah, Atif Khan, M. Irfan Uddin, Shafiq Ahmad, Muhammad Firdausi, Mazen Zaindin, 2021, Liver-Tumor Detection Using CNN ResUNet, CMC-Computers, Materials & Continua, 67, 1899-1914.
61	Amrani, M. A., Ghaleb, A. M., E Ragab, A., Ramadan, M. Z., & Khalaf, T. M. , 2020, Low-Cost Goethite Nanorods for As (III) and Se (VI) Removal from Water., Applied Sciences, 10, 7237.
62	AU Rehman, NK Babu, MK Talari, YS Usmani and Hisham Al-Khalefah , 2021, Microstructure and Mechanical Properties of Dissimilar Friction Welding Ti-6Al-4V Alloy to Nitinol, Metals, 11, 109.
63	M Baig, AH Seikh, AU Rehman, JA Mohammed, Faraz Hussain Hashmi and Sameh Mohamed Ragab, 2021, Microstructure Evaluation Study of Al5083 Alloy Using EBSD Technique after Processing with Different ECAP Processes and Temperatures, Crystals, 11, 862.
64	M. M. Nasr, S. Anwar, A. M. Al-Samhan, M. Ghaleb, and A. Dabwan, 2020, Milling of graphene reinforced Ti6Al4V nanocomposites: An artificial intelligence based industry 4.0 approach, Materials, 13, 1-22.
65	K. Ishfaq, S. Zahoor, S. A. Khan, M. Rehman, A. Alfaify, and S. Anwar, 2021, Minimizing the corner errors (top and bottom) at optimized cutting rate and surface finish during WEDM of Al6061, Engineering Science and Technology, an International Journal, 24, 1027-1041.
66	Al-Shayea, E. Fararah, E. A. Nasr and H. A. Mahmoud, 2020, Model for Integrating Production Scheduling and Maintenance Planning of Flow Shop Production System, IEEE Access, 8, 208826-208835.
67	Sharjeel Ashraf, Mustafa Khalid,Khurram Kamal,G Hussain Mohammed Alkahtani, 2021, Modeling and Simulation of a Proton Exchange Membrane Fuel Cell Alongside a Waste Heat Recovery System Based on the Organic Rankine Cycle in MATLAB/SIMULINK Environment, Sustainability , 13, 1 to 21.
68	Alnahhal, M., Ahrens, D., & Salah, B. , 2021, Modeling Freight Consolidation in a Make-to-Order Supply Chain: A Simulation Approach, Processes, 9, 1554.
69	Khalid Mehmood Cheema, Ahmad H. Milyani, Ahmed M. El-Sherbeeny, Mohammad A. El-Meligy,, 2021, Modification in active power-frequency loop of virtual synchronous generator to improve the transient stability, International Journal of Electrical Power & Energy Systems, 128, 106668.
70	Al-harkan, I.M., Qamhan, A.A., Badwelan, A., Alsamhan, A. and Hidri, L., 2021, Modified Harmony Search Algorithm for Resource-Constrained Parallel Machine Scheduling Problem with Release Dates and Sequence-Dependent Setup Times, Processes, 9, 654.
71	Alqahtani, M.A., Jeong, M.K. and Elsayed, E.A.,, 2020, Multi-Label Separation-Deviation Surface Model for Detecting Spatial Defects in Topographic Surfaces, IEEE Transactions on Industrial Informatics, 17, 4555-4565.
72	Dabwan, A., Ragab, A. E., Saleh, M. A., Ghaleb, A. M., Ramadan, M. Z., Mian, S. H., & Khalaf, T. M., 2021, Multiobjective optimization of process variables in single-point incremental forming using grey relational analysis coupled with entropy weights, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 29, 14644207211020400.
73	T Chaudhary, AN Siddiquee , Mustufa Haider Abidi, Abdulrahman Al-Ahmari, 2020, Multi-response optimization for Nimonic alloy miniature gear fabrication using wire electrical discharge machining, ADVANCES IN MECHANICAL ENGINEERING, 12, 1687814020967580.
74	NA Saeed, E Mahrous, E Abouel Nasr, J Awrejcewicz , 2021, Nonlinear Dynamics and Motion Bifurcations of the Rotor Active Magnetic Bearings System with a New Control Scheme and Rub-Impact Force , Symmetry, 13, 1-26.
75	Badwelan, A. M. Al-Samhan, S. Anwar, and L. Hidri, 2021, Novel Technique for Enhancing the Strength of Friction Stir Spot Welds through Dynamic Welding Parameters, Metals, 11, 280.
76	R Lin, Z Yu, X Shi, L Dong, EA Nasr, 2020, On Multi-Step Look-ahead Deadlock Prediction for Automated Manufacturing Systems Based on Petri Nets, IEEE Access, 8, 170421-170432.
77	Aicha Goubaa; Mohamed Khalgui, Zhiwu Li, Georg Frey and Abdulrahman Al-Ahmari, 2020, On Parametrizing Feasible Reconfigurable Systems Under Real-Time, Energy, and Resource Sharing Constraints, IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, 18, 1492.
78	M. M. Nasr, S. Anwar, A. M. Al-Samhan, H. S. Abdo, and A. Dabwan, 2020, On the machining analysis of graphene nanoplatelets reinforced Ti6Al4V matrix nanocomposites, Journal of Manufacturing Processes, 61,  574-589.
79	Alqahtani, M.S.; Al-Tamimi, A.A.; Hassan, M.H.; Liu, F.; Bartolo, P. , 2021, Optimization of a Patient-Specific External Fixation Device for Lower Limb Injuries, Polymers, 13, 2661-77.
80	Hidri, L., Gazdar, A., & M Mabkhot, M. , 2020, Optimized Procedure to Schedule Physicians in an Intensive Care Unit: A Case Study, Mathematics, 8, 1976.
81	Abdulhameed, SH Mian, A Al-Ahmari and Hisham Alkhalefah , 2020, Patch and curvature specific estimation of efficient sampling scheme for complex surface inspection, International Journal Of Advanced Manufacturing Technology , 110, 3407.
82	Osama Abdulhameed, Abdulrahman Al-Ahmari, Syed Hammad Mian and Mohamed K. Aboudaif, 2020, Path Planning and Setup Orientation for Automated Dimensional Inspection Using Coordinate Measuring Machines, Mathematical Problems In Engineering, 2020.
83	A Al-Ahmari, SH Mian, W Ameen, 2021, Performance assessment of fused deposition modeling process, Journal of Engineering Research, 9, 0.
84	Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, Mohammed A. Noman, and Haitham A. Mahmoud, 2020, Petri Net Model Based on Neural Network for Deadlock Control and Fault Detection and Treatment in Automated Manufacturing Systems, IEEE Access, 8, 103219 - 103235.
85	Khalaf TM, Ramadan MZ, Ragab AE, Alhaag MH, AlSharabi KA , 2021, Psychophysiological responses to manual lifting of unknown loads, PLoS ONE, 16, e0247442.
86	Hassan, S.R., Ahmad, I., Ahmad, S., Alfaify, A. and Shafiq, M., 2020, Remote Pain Monitoring Using Fog Computing for e-Healthcare: An Efficient Architecture, Sensors, 20, 6574.
87	Alsultan, M., Collier, Z.A. and Lambert, J.H., 2021, Risk-Based Priority Setting for Large-Scale Access Management Programs with Uncertain Mobility Benefits and Costs, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, 7, 4020046.
88	V. Priya, I. Sumaiya Thaseen, Thippa Reddy Gadekallu, Mohamed K. Aboudaif, Emad Abouel Nasr, 2021, Robust attack detection approach for iiot using ensemble classifier, CMC-Computers Materials & Continua , 66, 2457-2470.
89	A.U. Rehman, Y. Usmani, A. M. Al-Samhan, and S. Anwar, 2021, Rotary Friction Welding of Inconel 718 to Inconel 600, Metals, 11, 244.
90	Adel M. Al-Shayea, Mustafa Saleh, Moath Alatefi and Mageed Ghaleb, 2020, Scheduling Two Identical Parallel Machines Subjected to Release Times, Delivery Times and Unavailability Constraints, Processes, 8, 1025.
91	N. A. Saeed, Emad Mahrous Awwad, MA El-Meligy and Emad Abouel Nasr, 2021, Sensitivity analysis and vibration control of asymmetric nonlinear rotating shaft system utilizing 4-pole AMBs as an actuator, European Journal of Mechanics - A/Solids, 86, 104145.
92	Abukhadra, M. R., Basyouny, M. G., El-Sherbeeny, A. M., El-Meligy, M. A., & Luqman, M. , 2021, Sonocogreen Decoration of Clinoptilolite by CaO Nanorods as Ecofriendly Catalysts in the Transesterification of Castor Oil into Biodiesel; Response Surface Studies, ACS Omega, 6, 1556–1567.
93	Adel Al-Shayea, Fawaz M. Abdullah, Mohammed A. Noman, Husam Kaid, and Emad Abouel Nasr, 2020, Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel, Advances in Materials Science and Engineering, 2020, 5480614.
94	Shafiq Ahmad, Firoz Ahmad, Mohamed Sharaf, 2021, Supplier Selection Problem with Type-2 Fuzzy Parameters:A  Neutrosophic Optimization Approach, Int. Journal of Fuzzy Systems,, 23, 755-775.
95	Man, S. S., Chan, A. H. S., Alabdulkarim, S., & Zhang, T. (2021). Safety science, 136, 105155., 2021, The effect of personal and organizational factors on the risk-taking behavior of Hong Kong construction workers, Safety science, 136, 105155.
96	Lucheng Hong, Mian Rizwan, Muhammad Wasif, Shafiq Ahmad, Mazen Zaindin, Muhammad Firdausi,, 2021, User-Defined Dual Setting Directional Overcurrent Relays with Hybrid Time Current-Voltage Characteristics Based Protection Coordination for Active Distribution Network, IEEE Access, 9, 62752-62769.
97	Alasim, F. and Almalki, H., 2021, Virtual Simulation-Based Training for Aviation Maintenance Technicians: Recommendations of a Panel of Experts, SAE International Journal, 3, 1285-1292.
98	Shiradkar, S., Rabelo, L., Alasim, F. and Nagadi, K., 2021, Virtual World as an Interactive Safety Training Platform, Information, 12, 219.
99	T. Abbas, S. Anwar, H. Hegab, F. Benyahia, and H. Ali, 2021, Wear, and Specific Cutting Energy for Wiper and Conventional Carbide Inserts in Hard Turning of AISI 4340 Alloy Steel, Materials, 13, 1-16.

Conference Publications 2020-2021

 

Sn	Conference Publication
1	Mehdi Mrad, Khaled Bamatraf, Mohammed Alkahtani and Lotfi Hidri, “Genetic Algorithm Based on Clark & Wright’s Savings Algorithm for Reducing the Transportation Cost in a Pooled Logistic System”  Proceedings of the International Conference on Industrial Engineering and Operations Managemen,  Proceedings of the International Conference on Industrial Engineering and Operations Management Sao Paulo, Brazil, April 5-8, 2021.
2	Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, and Haitham A. Mahmoud, “Supervisor Controller-Based Elementary Siphons and Colored Petri Net for Deadlock Control and Machine Failures in Automated Manufacturing Systems”, The International Conference on Industrial Engineering and Operations Management, Sao Paulo, Brazil, April 5-8, 2021.
3	Saqib Anwar, Ateekh Ur Rehman, Yusuf Usmani, Ali M. Al-Samhan, On The Effect of Four Interlayers’ Thicknesses with Gradually Varying Thermal Expansion Coefficient Between Dissimilar Welds of 2.25Cr-1Mo Steel and Alloy 800H/4th European IEOM Rome Conference, Rome, Italy, August 2-5, 2021.
4	Ateekh Ur Rehman, Yusuf S Usmani, N. Kishore Babu, M.K. Talari, Hisham Al-khalifa, “An overview on dissimilar metals joining techniques for nitinol shape memory alloy to titanium alloy Ti-6Al-4V/4th European IEOM Rome Conference”, 4th European IEOM Rome Conference, Rome Italy, August 2-5, 2021.
5	A Elayeb, A Korbi, M Tlija, B Louhichi, "Optimal part orientation in the additive manufacturing process based on tolerancing" COTUME, Tunisia, 22 - 24 March 2021.
6	A Korbi, A Soued, A Elayeb, M Tlija, B Louhichi, A Benamara, "CAD/tolerancing integration: A Novel method for the tolerance analysis of cylindrical parts assemblies considering the manufacturing defects and the deformations of non-rigid components" COTUME, Tunisia, 22 - 24 March 2021
7	A Soued, A Korbi, M Tlija, B Louhichi,  "A novel CAD model for the tolerance analysis of planar parts assemblies with form defects" COTUME, Tunisia, 22 - 24 March 2021

 

Journals Publications 2019-2020

Sn	Publications
1	Mehdi Mrad, Olfa Harrabi, Jouhaina Chaouachi Siala, Anis Gharbi, 2020, A Column Generation-Based Lower Bound for the Minimum Sum Coloring Problem, IEEE Access, 8, 57891 - 57904, Q1, IF 3.745
2	Ali Ahmad, Mageed Ghaleb, Saber Darmoul, Mohammed Alkahtani, and Shatha Samman , 2019, A combined multitasking performance measure involving sequential and parallel task executions, Cognition, Technology & Work, , 12, Q4, IF 1.206
3	MM Mabkhot, S Darmoul, AM Al-Samhan, A Badwelan, 2020, A Multi-Criteria Decision Framework Considering Different Levels of Decision-Maker Involvement to Reconfigure Manufacturing Systems, Machines, 8, 8, , IF
4	Achraf Gazdar, Lotfi Hidri , 2020, A new similarity measure for collaborative filtering based recommender systems, Knowledge-Based Systems, 188, 105058, Q1, IF 5.921
5	Alqahtani, M.S., Al-Tamimi, A., Almeida, H. et al, 2020, A review on the use of additive manufacturing to produce lower limb orthoses, Prog Addit Manuf , 5, 85-94, NA, IF NA
6	Mohamed A. Mohamed, Elham Tajik, Emad Mahrous Awwad, Ahmed M. El-Sherbeeny, et al. , 2020, A two-stage stochastic framework for effective management of multiple energy carriers, Energy , 197, 117170, Q1, IF 6.082
7	Mian, S.H.; Salah, B.; Ameen, W.; Moiduddin, K.; Alkhalefah, H., 2020, Adapting Universities for Sustainability Education in Industry 4.0: Channel of Challenges and Opportunities., Sustainability , 12, 6100, Q3, IF 2.576
8	Xiaobo Li, Emad S. Abouel Nasr, Abdulaziz Mohammed El-Tamimi, and Zhiwu Li, , 2020, Adaptive Consensus of Two Coupled Heterogeneous Networked Systems with Bidirectional Actions, IEEE Access, 8, 9, Q1, IF 3.745
9	Salah, B., Khan, S. i Gjeldum, N. , 2020, An Automatic Yogurt Filling System Built from Scratch Based on Industry 4.0 Concept, . Transactions of FAMENA, 44 (2), 59-70, Q4, IF 0.58
10	Syed Atif Ali Shah, Irfan Uddin, Furqan Aziz, Shafiq Ahmad, Mahmoud Ahmad Al-Khasawneh & Mohamed Sharaf , 2020, An Enhanced Deep Neural Network for Predicting Workplace Absenteeism, Complexity, 2020, 1 to 12, Q2, IF 2.591
11	A. A. Qamhan, A. Ahmed, I. M. Al-Harkan, A. Badwelan, A. M. Al-Samhan and L. Hidri, 2020, An Exact Method and Ant Colony Optimization for Single Machine Scheduling Problem With Time Window Periodic Maintenance, IEEE Access, 8, 44836-44845, Q1, IF 3.745
12	Al Gahtani, Osama Saad, and Mehdi Mrad., 2020, An integer linear programming model to optimize the hub and spoke-based water sesalinated transmission system, Journal of Water Supply: Research and Technology, , , Q3, IF 1.319
13	Neeraj Bhanot, Fahham Hasan Qaiser, Mohammed Alkahtani and Ateekh Ur Rehman , 2020, An Integrated Decision‐Making Approach for Cause and‐Effect Analysis of Sustainable Manufacturing Indicators, Sustainability, 12, 1517, Q3, IF 2.576
14	Omid Avatefipour, Ameena Saad Al-Sumaiti, Ahmed M. El-Sherbeeny, et al., 2019, An Intelligent Secured Framework for Cyberattack Detection in Electric Vehicles’ CAN Bus Using Machine Learning., IEEE Access , 7, 127580-127592, Q1, IF 3.745
15	MM Mabkhot, SK Amri, S Darmoul, AM Al-Samhan, S Elkosantini, , 2020, An ontology-based multi-criteria decision support system to reconfigure manufacturing systems, IISE Transactions, 52, 18-42, Q3, IF 1.579
16	Mohammed M. Mabkhot,A. M. Al-Samhan, Lotfi Hidri, 2019, An Ontology-Enabled Case-Based Reasoning Decision Support System for Manufacturing Process Selection, Advances in Materials Science and Engineering, 2019,  ID 2505183, Q4, IF 1.271
17	Mian, S. H., Al-Ahmari, A., & Alkhalefah, H., 2019, Analysis and Realization of Sampling Strategy in Coordinate Metrology, Mathematical Problems in Engineering, 2019, 19, Q2, IF 1.009
18	AM Ghaleb, H Kaid, A Alsamhan, SH Mian, L Hidri, 2020, Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process, Advances in Materials Science and Engineering, 2020, , Q4, IF 1.271
19	Atef M. Ghaleb, Husam Kaid, Ali Alsamhan, Syed Hammad Mian, and Lotfi Hidri, 2020, Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process, Advances in Materials Science and Engineering, 2020, 4039253, Q4, IF 1.271
20	Ateekh Ur Rehman, Ayoub Al-Zabidi, Mohammed AlKahtani, Usama Umer and Yusuf Siraj Usmani , 2020, Assessment of Supply Chain Agility to Foster Sustainability: Fuzzy-DSS for a Saudi  Manufacturing Organization, Processes, 8, 755, Q2, IF 2.576
21	Saqib Anwar, Fawaz M. Abdullah, Mohammed S. Alkahtani, Shafiq Ahmad, Moath Alatefi , 2019, Bibliometric Analysis of Abrasive Water Jet Machining, Research, Journal of King Saud University - Engineering Sciences, 31, 262-270, , IF
22	Syed Ghazanfar Ali, Mohammad Azam Ansari, Mohammad A. Alzohairy, Mohammad N. Alomary, Sami AlYahya, Mohammad Jalal, Haris M. Khan, Sarah Mousa Maadi Asiri, Wasim Ahmad, Abbas Ali Mahdi, Ahmed M. El-Sherbeeny, et al., 2020, Biogenic Gold Nanoparticles as Potent Antibacterial and Antibiofilm Nano-Antibiotics against Pseudomonas aeruginosa., Antibiotics (Basel) , 9, 100, Q1, IF 3.893
23	MS Abbasi, MS Irshad, N Arshad, I Ahmed, M Idrees, S Ahmad, Z Wei, M Sharaf, MD Firdausi, 2020, Biomaterial-Induced Stable Resistive Switching Mechanism in TiO2 Thin Films: The Role of Active Interstitial Sites/Ions in Minimum Current Leakage and Superior Bioactivity, ACS Omega, 5, 19050-19060, Q2, IF 2.87
24	L. Hidri, A. M. Al-Samhan and M. M. Mabkhot, 2019, Bounding Strategies for the Parallel Processors Scheduling Problem With No-Idle Time Constraint, Release Date, and Delivery Time, IEEE Access, 7, 170392-170405, Q1, IF 3.745
25	Nadeem A, Ahmad SF, Al-Harbi NO, Ahmad M Elsherbeeny, et al. , 2020, Bruton's tyrosine kinase inhibitor suppresses imiquimod-induced psoriasis-like inflammation in mice through regulation of IL-23/IL-17A in innate immune cells. , Int Immunopharmacol, 80, 106215, Q2, IF 3.943
26	Mian, S. H., & Al-Ahmari, A., 2019, Comparative analysis of different digitization systems and selection of best alternative, Journal of Intelligent Manufacturing, 30, 2039-2067, Q1, IF 4.311
27	Mohamed Z. Ramadan and Sultan N. Al-Tayyar , 2019, Comparison between the Physiological Responses and Subjective Ratings of a Group of Male Students to Three Backpack Designs, International journal of environmental research and public health, 16, 4104, Q2, IF 2.849
28	Kaid, H., Al-Ahmari, A., El-Tamimi, A. M., Nasr, E. A., & Li, Z., 2019, Design and Implementation of Deadlock Control for Automated Manufacturing Systems, South African Journal of Industrial Engineering, 30, 21, Q4, IF 0.488
29	Atef M. Ghaleb & Mohamed Z. Ramadan & Ahmed Badwelan, Lamjed Mansour, Jameel Al-Tamimi and Khalid Saad Aljaloud , 2020, Determining the time needed for workers to acclimatize to hypoxia, International Journal of Biometeorology, , 11, Q2, IF 2.68
30	Mohamed Z. Ramadan and Sultan N. Al-Tayyar , 2020, Development and Experimental Verification of an Ergonomic Backpack, BioMed Research International, 2020, 13, Q3, IF 2.276
31	Saad A. Alabdulkarim, Abdulsalam M. Farhan and Mohamed Z. Ramadan , 2020, Development and Investigation of a Wearable Aid for a Load Carriage Task, International journal of environmental research and public health, 17, 749, Q2, IF 2.849
32	Jia Mao, Dou Hong, Runwang Ren, Xiangyu Li, Ju Wang, Emad S. Abouel Nasr, 2020, Driving Conditions of New Energy Logistics Vehicles Using Big Data Technology, IEEE Access, 8, 12, Q1, IF 3.745
33	Zhaofang Chen, Lele Zhang, Guangdong Tian, and Emad Abouel Nasr, 2020, Economic Maintenance Planning of Complex Systems Based on Discrete Artificial Bee Colony Algorithm, IEEE Access, 8, 9, Q1, IF 3.745
34	Atef M. Ghaleb, Mohamed Z. Ramadan, Khalid Saad Aljaloud , 2019, Effect of Ambient Oxygen Content and Lifting Frequency on the Participant’s Lifting Capabilities, Muscle Activities, and Perceived Exertion, International Journal of Health and Medical Engineering, 13, 489-493, , IF
35	Atef M. Ghaleb, Mohamed Z. Ramadan, Ahmed Badwelan and Khalid Saad Aljaloud , 2019, Effect of Ambient Oxygen Content, Safety Shoe Type, and Lifting Frequency on Subject’s MAWL and Physiological Responses, International journal of environmental research and public health, 16, 4172, Q2, IF 2.849
36	Atef M. Ghaleb, Tamer M. Khalaf , Mohamed Z. Ramadan, Adham E. Ragab and Ahmed Badwelan, 2020, Effect of Cycling on a Stationary Bike While Performing Assembly Tasks on Human Physiology and Performance Parameters, International journal of environmental research and public health, 17, 1761, Q2, IF 2.849
37	Atef M. Ghaleb & Mohamed Z. Ramadan & Ahmed Badwelan, Lamjed Mansour, Jameel Al-Tamimi and Khalid Saad Aljaloud, 2020, Effect of hypoxia, safety shoe type, and lifting frequency on the subject’s cardiovascular and ventilation responses, International Journal of Industrial Ergonomics, 2020, 11, Q3, IF 1.662
38	Mostafa R. Abukhadra, Samar Mohamed Alia, Ahmed M. El-Sherbeeny. , 2020, Effective and environmental retention of some radioactive elements (U (VI),Sr (II), and Ba (II)) within bentonite/zeolite hybrid structure; equilibrium and realistic study. , Inorganic Chemistry Communications , 119, 108053, Q2, IF 1.943
39	Mostafa R. Abukhadra, Samar Mohamed Ali, Emad Abouel Nasr, Haitham Abbas Ahmed Mahmoud, and Emad Mahrous Awwad, 2020, Effective Sequestration of Phosphate and Ammonium Ions by the Bentonite/Zeolite Na−P Composite as a Simple Technique to Control the Eutrophication Phenomenon: Realistic Studies, ACS Omega, 5, 12, Q2, IF 2.87
40	Mostafa R. Abukhadra, Merna Mostafa, Ahmed M. El-Sherbeeny, et al. , 2020, Effective transformation of waste sunflower oil into biodiesel over novel K+ trapped clay nanotubes (K+/KNTs) as a heterogeneous catalyst; response surface studies. , Microporous and Mesoporous Materials , 306, 110465, Q2, IF 4.551
41	Fares F. Alferdaws and Mohamed Z. Ramadan, 2020, Effects of Lifting Method, Safety Shoe Type, and Lifting Frequency on Maximum Acceptable Weight of Lift, Physiological Responses, and Safety Shoes Discomfort Rating, International journal of environmental research and public health, 17, 3012, Q2, IF 2.849
42	Mostafa R. AbuKhadra, Mohamed Gameel Basyouny, Ali A. AlHammadi, Ahmed M. El-Sherbeeny, et al. , 2020, Enhanced decontamination of levofloxacin as toxic pharmaceutical residuals from water using CaO/MgO nanorods as a promising adsorbent. , Scientific Reports , 10, 14828, Q1, IF 3.998
43	Mrad, M., Chalghoumi, S., Ladhari, T., & Gharbi, A. , 2019, Enhanced lower bounds and exact procedures for total completion time minimization in a two‐machine permutation flowshop with release dates, International Transactions in Operational Research, 26, 2432--2449, Q2, IF 2.987
44	Mostafa R. AbuKhadraa, Aya S. Mohamed, Ahmed M. El-Sherbeeny, et al. , 2020, Enhanced photocatalytic degradation of acephate pesticide over MCM-41/Co3O4 nanocomposite synthesized from rice husk silica gel and Peach leaves. , Journal of Hazardous Materials , 389, 122129, Q1, IF 9.038
45	Ishfaq, K., Ahmad, N., Jawad, M., Ali, M. A., & Al-Ahmari, A. M. , 2019, Evaluating Material's Interaction in Wire Electrical Discharge Machining of Stainless Steel (304) for Simultaneous Optimization of Conflicting Responses, Materials, 12, 1940, Q2, IF 3.057
46	Mostafa R. Abukhadra, Mohammed A. El-Meligy, Ahmed M. El-Sherbeeny. , 2020, Evaluation and characterization of Egyptian ferruginous kaolinite as adsorbent and heterogeneous catalyst for effective removal of safranin-O cationic dye from water. , Arabian Journal of Geosciences , 13, 169, Q4, IF 1.327
47	Mohamed Z. Ramadan, Mustafa M. Nasr, Abdulmajeed A. Dabwan, Tamer M. Khalaf, Mohammed H. Alhaag, Ahmed T. Soliman, Abdelaty E. Abdelgawad , 2019, Evaluation of holding handheld scanner on muscle activity, heart rate variability, and model accuracy in industrial applications, International Journal of Industrial Ergonomics, 74, 102873, Q3, IF 1.662
48	Asim Ahmad Riaz, Naveed Ullah, Ghulam Hussain, Mohammed Alkahtani, Muhammad Naeem Khan, and Shaukat Khan, 2020, Experimental Investigations on the Effects of Rotational Speed on Temperature and Microstructure Variations in Incremental Forming of T6- Tempered and Annealed AA2219 Aerospace Alloy, Metals, 10, 809, Q2, IF 2.117
49	Mostafa R. Abukhadra, Nermen M. Refay, Ahmed M. El-Sherbeeny, et al. , 2019, Facile synthesis of bentonite/biopolymer composites as low-cost carriers for 5-fluorouracil drug; equilibrium studies and pharmacokinetic behavior. , International Journal of Biological Macromolecules , 141, 721-731, Q1, IF 5.162
50	Hongyu Wei, G. Hussain, X. Shi, B. B. L Isidore, Mohammed Alkahtani, and Mustufa Haider Abidi , 2020, Formability of Materials with Small Tools in Incremental Forming,, Chinese Journal of Mechanical Engineering, 33, 55, Q3, IF 1.824
51	Sian Zhou, Zhenhua Yu, Emad S. Abouel Nasr, Haitham A. Mahmoud, Emad Mahrous Awwad, Naiqi Wu, 2020, Homomorphic Encryption of Supervisory Control Systems Using Automata, IEEE Access, 8, 147185-147198, Q1, IF 3.745
52	Mohammed Alkahtani, Mustufa Haider Abidi, Ali Ahmad, Saber Darmoul, Shatha Samman, and  Mageed Ghaleb , 2020, Human Interruption Management in Workplace Environments: An Overview, Engineering, Technology & Applied Science Research, 10, 5452--5458, , IF
53	Hafsa Mir, Tahir Abdul Hussain Ratlamwala, Ghulam Hussain, Mohammed Alkahtani, and Mustufa Haider Abidi , 2020, Impact of Sloshing on Fossil Fuel Loss during Transport, Energies, 13, 2625, Q3, IF 2.702
54	Adeleye, A. A., Alabdulkarim, S. A., & Nussbaum, M. A. , 2020, Impacts of different fabric scissor designs on physical demands and performance in simulated fabric cutting tasks, Applied Ergonomics, 89, 103219, Q2, IF 3.145
55	Ramadan, M.; Salah, B.; Othman, M.; Ayubali, A.A, 2020, Industry 4.0-Based Real-Time Scheduling and Dispatching in Lean Manufacturing Systems., Sustainability , 12, 2272, Q3, IF 2.576
56	Sk. Md. Ali Ahsan, Shamim Mahbub, Md. Anamul Hoque, Mohammed Abdullah Khan, Dileep Kumar, Javed Masood Khan, Ahmed M. El-Sherbeeny. , 2020, Influence of electrolytes on the cloud point phenomenon of tween-80+lomefloxacin hydrochloride mixtures and their thermodynamic parameters. , Journal of Molecular Liquids , 318, 113999, Q1, IF 5.065
57	Mostafa R. Abukhadra, Nermen M. Refay, Ahmed M. El-Sherbeeny, et al. , 2020, Insight into the Loading and Release Properties of MCM-48/Biopolymer Composites as Carriers for 5‐Fluorouracil: Equilibrium Modeling and Pharmacokinetic Studies. , ACS Omega , 5, 11745−11755, Q2, IF 2.87
58	Guohong Liu, Mostafa R. Abukhadra, Ahmed M. El-Sherbeeny, et al. , 2020, Insight into the photocatalytic properties of diatomite@Ni/NiO composite for effective photo-degradation of malachite green dye and photo-reduction of Cr (VI) under visible light., Journal of Environmental Management , 254, 109799, Q1, IF 5.647
59	Emad Abouel Nasr, Abdulrahman Al-Ahmari, Awais A. Khan, Syed Hammad Mian, Osama Abdulhameed & Ali Kamrani, , 2020, Integrated system for automation of process, fixture and inspection planning, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 10, Q3, IF 1.755
60	Salah, B.; Khan, S.; Ramadan, M.; Gjeldum, N., 2020, Integrating the Concept of Industry 4.0 by Teaching Methodology in Industrial Engineering Curriculum, Processes , 8, 1007, Q2, IF 2.753
61	Kaid, H., Al-Ahmari, A., Li, Z., & Davidrajuh, R, 2020, Intelligent Colored Token Petri Nets for Modeling, Control, and Validation of Dynamic Changes in Reconfigurable Manufacturing Systems., Processes, 8, 358, Q2, IF 2.753
62	Mohammed Alkahtani, Shafiq Ahmad, Mohammed A. Noman and Husam Kaid, Ahmed Badwelan , 2020, International Journal of Industrial and Systems Engineering, International Journal of Industrial and Systems Engineering, 35, 314--344, , IF
63	Imran, M., Habib, M. S., Hussain, A., Ahmed, N., & Al-Ahmari, A. M. , 2020, Inventory Routing Problem in Supply Chain of Perishable Products under Cost Uncertainty, Mathematics, 8, 382, Q1, IF 1.747
64	Naveed Ahmed, Salman Pervaiz, Shafiq Ahmad, Madiha Rafaqat, Adeel Hassan, Mazen Zaindin , 2019, LBM of aluminium alloy: towards a control of material removal and roughness, The International Journal of Advanced Manufacturing Technology, 105, 1901–1915, Q3, IF 3.633
65	Ateekh Ur Rehman, Yusuf S. Usmani, Usama Umer & Mohammed Alkahtani , 2020, Lean Approach to Enhance Manufacturing Productivity: A Case Study of Saudi Arabian Factory, Arabian Journal for Science and Engineering , 45, 2263–2280, Q3, IF 1.711
66	N. Ahmed, S. Ahmad, S. Anwar, A. Hussain, M. Rafaqat, and M. Zaindin, 2019, Machinability of titanium alloy through laser machining: material removal and surface roughness analysis, The International Journal of Advanced Manufacturing Technology, 105, 3303-3323, Q2, IF 2.633
67	Atif Khan, Ibrahim Ibrahim, M. Irfan Uddin, Muhammad Zubair, Shafiq Ahmad, Muhammad Dzulqarnain Al Firdausi, Mazen Zaindin, 2020, Machine Learning Approach for Answer Detection in Discussion Forums: an Application of Big Data Analytics, Scientific Programming, 2020, 1 to 10, Q3, IF 1.289
68	Al-Tamimi, A.A., Hernandez, M.A., Omar, A. et al, 2020, Mechanical, biological and tribological behaviour of fixation plates 3D printed by electron beam and selective laser melting, Int J Adv Manuf Technol , 109, 673-688, Q1, IF 2.633
69	Saleh M, Anwar S, El-Tamimi A, Khan Mohammed M, Ahmad S , 2020, Milling Micro-channels in Monel 400 Alloy by Wire EDM: An Experimental Analysis, Micromachines, 11, 1 to 17, Q2, IF 2.523
70	Umer, U., Ameen, W., Abidi, M. H., Moiduddin, K., Alkhalefah, H., Alkahtani, M., & Al-Ahmari, A. , 2019, Modeling the Effect of Different Support Structures in Electron Beam Melting of Titanium Alloy Using Finite Element Models, Metals, 9, 806, Q2, IF 2.117
71	Ateekh Ur Rehman, Mustufa Haider Abidi, Usama Umer and Yusuf Siraj Usmani , 2019, Multi-Criteria Decision-Making Approach for Selecting Wind Energy Power Plant Locations, Sustainability, 11, 6112, Q3, IF 2.576
72	Ali Abdo, Jamal Siam, Bashir Salah & Mohammed Krid , 2020, Multiple-sensor fault detection and isolation using video processing in production lines, International Journal of Computer Integrated Manufacturing, 33 (6), 531-549, Q2, IF 2.861
73	A. T. Abbas, N. Sharma, S. Anwar, M. Luqman, I. Tomaz, and H. Hegab, 2020, Multi-response optimization in high-speed machining of Ti-6Al-4V using TOPSIS-fuzzy integrated approach, Materials, 13, 1 to 14, Q2, IF 3.057
74	Hidri, Lotfi, and Mahdi Jemmali., 2020, Near-optimal solutions and tight lower bounds for the parallel machines scheduling problem with learning effect., RAIRO-Operations Research , 54 (2), 507-527, Q4, IF 1.025
75	Tahir Rizwan, Yunze Cai1, Muhammad Ahsan, Noman Sohail, Emad Abouel Nasr, and Haitham A. Mahmoud, 2020, Neural Network Approach for 2-Dimension Person Pose Estimation with Encoded Mask and Keypoint Detection, IEEE Access, 8, 11, Q1, IF 3.745
76	ADEL AL-SHAYEA, MOHAMMED A. NOMAN, EMAD ABOUEL NASR, HUSAM KAID , ALI K. KAMRANI, AND ABDULAZIZ M. EL-TAMIMI, 2019, New Integrated Model for Maintenance Planning and Quality Control Policy for Multi-Component System Using an EWMA Chart, IEEE Access , 7, 160623-160636, Q1, IF 3.745
77	Lan Yang, Zhenhua Yu, Mohammed A. El-Meligy, Ahmed M. El-Sherbeeny, et al. , 2020, On Multiplexity-Aware Influence Spread in Social Networks, IEEE Access , 8, 106705-106713, Q1, IF 3.745
78	S. Anwar, N. Ahmed, S. Pervaiz, S. Ahmad, A. Mohammad, and M. Saleh, 2020, On the turning of electron beam melted gamma-TiAl with coated and uncoated tools: A machinability analysis, Jorunal Materials Processing Technology, 282, 116664, Q1, IF 4.669
79	Mrad, Mehdi, et al., 2020, Optimal k Cut-Sets in Attack/Defense Strategies on Networks, IEEE Access , 8, 131165-131177, Q1, IF 3.745
80	Mohamed A. Mohamed, Emad Mahrous Awwad, Ahmed M. El-Sherbeeny, et al. , 2020, Optimal scheduling of reconfigurable grids considering dynamic line rating constraint. , IET Generation, Transmission & Distribution , 14, 1862-1871, Q2, IF 2.862
81	Mohammed, M. K., Umer, U., & Al-Ahmari, A, 2019, Optimization of Nd:YAG laser for microchannels fabrication in alumina ceramic, Journal of Manufacturing Processes, 81, 148-158. , Q1, IF 4.086
82	Moath Alatefi, Shafiq Ahmad, Mohammed Alkahtani, 2019, Performance Evaluation Using Multivariate Non-Normal Process Capability, Processes, 7, 1 to 24, Q2, IF 2.753
83	Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, Mohammed A. Noman, Haitham A. Mahmoud, 2020, Petri net Model Based on Neural Network for Deadlock Control and Fault Detection and Treatment in Automated Manufacturing Systems, IEEE Access, 8, 103219-103235, Q1, IF 3.745
84	Hongyu Wei, Ghulam Hussain, Behzad Heidarshenas, and Mohammed Alkahtani , 2020, Post-Forming Mechanical Properties of a Polymer Sheet Processed by Incremental Sheet Forming: Insights into Effects of Plastic Strain, and Orientation and Size of Specimen, Polymers, 12, 1780, Q1, IF 3.426
85	Rajamani Devaraj, Emad Abouel Nasr, Balasubramanian Esakki, Ananthakumar Kasi andHussein Mohamed, 2020, Prediction and Analysis of Multi- Response Characteristics on Plasma Arc Cutting of Monel 400™ Alloy Using Mamdani - Fuzzy Logic System and Sensitivity Analysis, Materials, 13, 25, Q2, IF 3.057
86	Ali Alsamhan, Adham E. Ragab, Abdulmajeed Dabwan ,Mustafa M. Nasr, Lotfi Hidri , 2019, Prediction of formation force during single-point incremental sheet metal forming using artificial intelligence techniques, PLOS ONE, 14 (8), e0221341, Q2, IF 2.74
87	Marwan Alsultan, Jungwook Jun, and James H. Lambert, 2019, Program evaluation of highway access with innovative risk-cost-benefit analysis, Reliability Engineering and System Safety, 193, 44075, Q1, IF 5.04
88	Mostafa R. Abukhadra, Alyaa Adlii, Ahmed M. El-Sherbeeny, et al. , 2020, Promoting the decontamination of different types of water pollutants (Cd2+, safranin dye, and phosphate) using a novel structure of exfoliated bentonite admixed with cellulose nanofiber., Journal of Environmental Management , 273, 111130, Q1, IF 5.647
89	Man, S. S., Chan, A. H. S., & Alabdulkarim, S. , 2020, Quantification of risk perception: Development and validation of the construction worker risk perception (CoWoRP) scale, Journal of safety research, 71, 25-39, Q2, IF 2.401
90	Nasser A. Saeed, Emad Mahrous Awwad, Mohammed A. El-Meligy, Emad S. Abouel Nasr, 2020, Radial Versus Cartesian Control Strategies to Stabilize the Nonlinear Whirling Motion of the Six Pole Rotor AMBs, IEEE Access, 8, 24, Q1, IF 3.745
91	Furqan Aziz, Taeeb Ahmad, Abdul Haseeb Malik, M. Irfan Uddin, Shafiq Ahmad, Mohamed Sharaf, 2020, Reversible data hiding techniques with high message embedding capacity in images, PLoS One, 2020, 1 to 24, Q2, IF 2.74
92	Basem M. A. Abdo, Abdualziz El-Tamimi and Emad Abouel Nasr, 2020, Rotary Ultrasonic Machining of Alumina Ceramic: An Experimental Investigation of Tool Path and Tool Overlapping, Applied Sciences Basel, 10, 21, Q2, IF 2.474
93	AM Al-Shayea, M Saleh, M Alatefi, M Ghaleb, 2020, Scheduling Two Identical Parallel Machines Subjected to Release Times, Delivery Times and Unavailability Constraints,, Processes, 8, 1025-1044, Q2, IF 2.576
94	Kaid, H., Al-Ahmari, A., Li, Z., & Davidrajuh, R., 2019, Single Controller-Based Colored Petri Nets for Deadlock Control in Automated Manufacturing Systems, Processes, 8, 21, Q2, IF 2.753
95	L. Hidri and A. Gazdar, 2020, Solution of a Non-Classical Integral Equation Modeling a Rotating Thin Rod Under Some Constraints and Technical Feasibility, IEEE Access, 8, 68135-68145, Q1, IF 3.745
96	Mostafa R. Abukhadra, Aya S. Mohamed, Ahmed M. El-Sherbeeny, et al. , 2020, Sonication induced transesterification of castor oil into biodiesel in the presence of MgO/CaO nanorods as a novel basic catalyst: Characterization and optimization. , Chemical Engineering & Processing: Process Intensification , 154, 108024, Q2, IF 3.731
97	Mohamed A. Mohamed, Hossein Chabok, Emad Mahrous Awwad, Ahmed M. El-Sherbeeny, et al., 2020, Stochastic and distributed scheduling of shipboard power systems using MθFOA-ADMM, Energy , 206, 118041, Q1, IF 6.082
98	Ateekh Ur Rehman, Syed Hammad Mian, Usama Umer and Yusuf Siraj Usmani , 2019, Strategic Outcome Using Fuzzy-AHP-Based Decision Approach for Sustainable Manufacturing, Sustainability, 11, 6040, Q3, IF 2.576
99	Al-Tamimi, A.A., Quental, C., Folgado, J. et al, 2020, Stress analysis in a bone fracture fixed with topology-optimised plates, . Biomech Model Mechanobio, 19, 693-699, Q2, IF 2.527
100	Al-Ahmari, A., Kaid, H., Li, Z., & Davidrajuh, R., 2020, Strict Minimal Siphon-Based Colored Petri Net Supervisor Synthesis for Automated Manufacturing Systems With Unreliable Resources, IEEE Access, 8, 22411-22424., Q1, IF 3.745
101	Al-Tamimi, A.A., Almeida, H. & Bartolo, P, 2020, Structural optimisation for medical implants through additive manufacturing, Prog Addit Manuf , 5, 95-110, NA, IF NA
102	Abdulmajeed Dabwan , Adham E. Ragab , Mohamed A. Saleh, Saqib Anwar, Atef M. Ghaleb and Ateekh Ur Rehman , 2020, Study of the Effect of Process Parameters on Surface Profile Accuracy in Single-Point Incremental Sheet Forming of AA1050-H14 Aluminum Alloy, Advances in Materials Science and Engineering, 2020, 14, Q4, IF 1.271
103	Adel Al-Shayea, Fawaz M. Abdullah, Mohammed A. Noman, Husam Kaid and Emad Abouel Nasr, 2020, Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel, Advances in Materials Science and Engineering, 2020,  15, Q4, IF 1.271
104	Adel AL-SHAYEA, Abdulmajeed DABWAN, Adham E RAGAB, Mustafa M. NASR, Husam KAID, 2019, Studying the Effect of Process Parameters on Part Depth in Single Point Incremental Forming of AA1050-H14 Aluminum Alloy Sheets, Technical Gazette, 6, 1606-1613, Q4, IF 0.67
105	Atif Khan, Muhammad Gul, M. Irfan Uddin, Syed Atif Ali Shah, Shafiq Ahmad, Muhammad Al Firdausi, and Mazen Zaindin, 2020, Summarizing Online Movie Reviews: A Machine learning approach to Big Data Analytics, Scientific Programming, 2020, 1 to 14, Q4, IF 0.963
106	Mostafa R. Abukhadra, Aya S. Mohamed, Ahmed M. El-Sherbeeny, et al. , 2020, Synthesis of exfoliate bentonite/cellulose nanocomposite as a delivery system for Oxaliplatin drug with enhanced loading and release properties; cytotoxicity and pharmacokinetic studies. , Chemical Physics Letters , 755, 137818, Q3, IF 2.029
107	Yaghlane, Asma Ben, M. Naceur Azaiez, and Mehdi Mrad, 2019, System survivability in the context of interdiction networks, Reliability Engineering & System Safety, 185, 362--371, Q1, IF 5.04
108	Mustufa Haider Abidi, Nabeel Ali, Hashmatullah Ibrahimi, Saquib Anjum, Dhruv Bajaj ,Arshad Noor Siddiquee, Mohammed Alkahtani and Ateekh Ur Rehman , 2020, T-FSW of Dissimilar Aerospace Grade Aluminium Alloys: Influence of Second Pass on Weld Defects, Metals , 10, 525, Q2, IF 2.117
109	Mostafa R. Abukhadra, Mohamed Gameel Basyouny, Ahmed M. El-Sherbeeny, et al. , 2020, The effect of different green alkali modification processes on the clinoptilolite surface as adsorbent for ammonium ions; characterization and application. , Microporous and Mesoporous Materials , 300, 110145, Q2, IF 4.551
110	Aya S. Mohameda, Mostafa R. Abukkhadra, Ezzat A. Abdallah, Ahmed M. El-Sherbeeny, et al. , 2020, The photocatalytic performance of silica fume based Co3O4/MCM-41 green nanocomposite for instantaneous degradation of Omethoate pesticide under visible light. , Journal of Photochemistry & Photobiology A: Chemistry , 392, 112434, Q2, IF 3.306
111	N. Ahmed, S. Anwar, K. Ishfaq, M. Rafaqat, M. Saleh, and S. Ahmad, 2019, The potentiality of sinking EDM for micro-impressions on Ti-6Al-4V : keeping the geometrical errors ( axial and radial ) and other machining measures ( tool erosion and work roughness ) at minimum, Scientific Reports, 9, 43101, Q1, IF 3.998
112	Al-Harbi NO, Nadeem A, Ahmad SF, Saleh A Bakheet, Ahmad M Elsherbeeny, et al. , 2020, Therapeutic treatment with Ibrutinib attenuates imiquimod-induced psoriasis-like inflammation in mice through downregulation of oxidative and inflammatory mediators in neutrophils and dendritic cells, Eur J Pharmacol, 877, 173088, Q2, IF 3.263
113	F. M. Abdullah, S. Anwar, and A. Al-ahmari, 2020, Thermomechanical Simulations of Residual Stresses and Distortion in Electron Beam Melting with Experimental Validation for Ti-6Al-4V, Metals, 10, 1151, Q2, IF 2.117
114	A. T. Abbas, N. Sharma, S. Anwar, F. H. Hashmi, and M. Jamil, 2019, Towards Optimization of Surface Roughness and Productivity Aspects during High-Speed Machining of Ti – 6Al – 4V, Materials, 12, 3749, Q2, IF 3.057
115	Mostafa R. AbuKhadra, Mohamed Gameel Basyouny, Ahmed M. El-Sherbeeny, et al. , 2020, Transesterification of commercial waste cooking oil into biodiesel over innovative alkali trapped zeolite nanocomposite as green and environmental catalysts., Sustainable Chemistry and Pharmacy , 17, 100289, Q2, IF 3.294
116	Alreshidi, N. A., Mrad, M., Subasi, E., & Subasi, M. M., 2020, Two-stage bond portfolio optimization and its application to Saudi Sukuk Market, Annals of Operations Research, , 1--43, Q2, IF 3.583
117	Ramadan, M. Z., Ghaleb, A. M., & Ragab, A. E. , 2020, Using electroencephalography (EEG) power responses to investigate the effects of ambient oxygen content, safety shoe type, and lifting frequency on the worker’s activities, BioMed Research International, 2020, , Q3, IF 2.276
118	Saud Altaf , Shafiq Ahmad, Mazen Zaindin and Muhammad Waseem Soomro, 2020, Xbee-Based WSN Architecture for Monitoring of Banana Ripening Process Using Knowledge-Level Artificial Intelligent Technique, Sensors, 20, 1 to 17, Q2, IF 3.275

Conference Publications 2019-2020

 

Sn	Conference Publication
1	Kaid, H., El-Tamimi, A. M., Al-Ahmari, A., Noman, M., Li, Z., & Nasr, E. A, 2019, Deadlock Control Design and PLC Implementation of Automated Manufacturing Systems. , Proceedings of the International Conference on Industrial Engineering and Operations Management , Riyadh, Saudi Arabia, Nov.26-28, 2019
2	S. Anwar, 2020, Electron beam melting of γ-TiAl and minimization of its surface roughness and cutting forces in turning, Proceedings of the International Conference on Industrial Engineering and Operations Management (IEOM), Dubai, UAE, 2020
3	Alabdulkarim, S., Almahfud, S., & Almutairi, A, 2019, Measurement of Mosques Inner and Outer Sound Levels, the International Conference on Industrial Engineering and Operations Management , Riyadh, Saudi Arabia , November 26-28, 2019
4	Mohammed A. Noman, Adel AL-Shayea, Emad Abouel Nasr, Abdulaziz M. El-Tamimi and Husam Kaid,, 2019, Overview and Applications of the Integrated Approaches of Maintenance and Process Quality Control, International Conference on Industrial Engineering and Operations Management, Riyadh, Saudi Arabia, Nov.26-28, 2019
5	Mohammed Alkahtani and Mustufa Haider Abidi , 2019, Supply Chain In the Era of Additive Manufacturing, Proceedings of the 2019 GCC IEOM Industrial Engineering and Operations Management Conference, Riyadh, Saudi Arabia, Nov.26-28, 2019.
6	Mohammed H. Alhaag and Mohamed Z. Ramadan , 2020, The Impact of Viewing 2D and 3D movies on Physiological Responses, Proceedings of the International Conference on Industrial Engineering and Operations Management, Sao Paulo, Brazil, April 14-16, 2020.

 

Journals Publications 2018-2019

Publications	Sn.
M. A. K. CHOWDHURY, Ateekh Ur REHMAN, M. S. UDDIN, Mohammed ALKAHTANI, Saqib ANWAR, “Multi Criteria Optimization Approach for Dressing of Vitrified Grinding Wheel”, Technical Gazette 25, Suppl. 2(Sept 2018), 256-265 (ISI /IF: 0.644/ Q4)	1
Ren, H., Xu, J., Liang, Y., Rehman, A. U., & Umer, U., “On state-space compression and state reachability retrieval of Petri nets”, Advances in Mechanical Engineering, 2019, Vol. 11(2) 1–15 (ISI /IF: 1.024/ Q4)	2
Salah, Bashir., Abidi, M., Mian, S., Krid, M., Alkhalefah, H., Abdo, A., (2019) "Virtual Reality Based Engineering Education to Enhance Manufacturing Sustainability in Industry 4.0" Sustainability.	3
Salah, Bashir , Essam R. El-Zaharb,⁎, A.F. Aljohani, A. Ebaid, Mohammed Krid, (2019), "Optical soliton solutions of the time-fractional perturbed Fokas-Lenells equation: Riemann-Liouville fractionalderivative",Optik Volume 183, April 2019, Pages 1114-1119	4
Yaghlane, Asma Ben, M. Naceur Azaiez, and Mehdi Mrad (2019) " System Survivability in the Context of Interdiction Networks", Reliability Engineering & System Safety, 185, 362–371 (ISI /IF: 4.039/ Q1/ top 10%)	5
Mehdi Mrad, Khalid S. Al-Gahtani, Rahmeto Hulchafo, Nizar Souayah  and Khaled Bamatraf  (2019) " Risk Assessment for Discrete Stochastic Time-Cost-Quality Trade-Off Problem Using Simulation-Based Integer Linear Programming Approach", IEEE Access  ( ISI /IF : 4.098/  Q1)	6
Abdo B.M.A., Anwar S., & El-Tamimi A.M. (2019). ‘Machinability study of biolox forte ceramic by milling microchannels using rotary ultrasonic machining’. Journal of Manufacturing Processes, 43(Part-A), 175-191.	7
Basem M. A. Abdo, Saqib Anwar, Abdulaziz M. El-Tamimi, and Emad Abouel Nasr,      (2019)"Experimental Analysis on the Influence and Optimization of μ-RUM Parameters in Machining Alumina Bioceramic", Materials (Basel), Vol. 12, No. 4. pp. 616,.	8
H. Kaid, A. Al-AhmariI, A.M. El-TamimiI, E. Abouel NasrI, Z. LiIII, (2019)"Design and Implementation of Deadlock Control for Automated Manufacturing Systems", South African Journal of Industrial Engineering., Vol. 30, No. 1, pp. 1-23.	9
Li X., Chen W., Nasr E.A., El-Tamimi A.M., & Li Z. (2019). ‘Group Consensus for Heterogeneous Multi-Agent Systems With Sampled and Quantized Data Under Directed Communication Topology’. IEEE Access, 7, 48318-48327.	10
Basem M. A. Abdo, Naveed Ahmed, Abdulaziz M. El-Tamimi, Saqib Anwar, Hisham Alkhalefah, Emad Abouel Nasr, (2019) "Laser Beam Machining of Zirconia Ceramic: An Investigation of Micromachining Geometry and Surface Roughness", Journal of Mechanical Science and Technology, 33, No. 4, pp. 1-15,	11
Cong Wang, Jixing Chen, Zhiwu Li, Emad S. Abouel Nasr, Abdulaziz Mohammed El-Tamimi ,( 2019) "An Indicator System for Evaluating the Development Of Land-Sea Coordination Systems: A Case Study Of Lianyungang Port", Ecological Indicators, 98, pp.112–120.	12
Abdo B.M.A., El-Tamimi A.M., Anwar S., Umer U., Alahmari A.M., & Ghaleb M.A. (2018). ‘Experimental investigation and multi-objective optimization of Nd:YAG laser micro-channeling process of zirconia dental ceramic’. The International Journal of Advanced Manufacturing Technology, 98(5-8), pp. 2213–2230.	13
Mohammed M.K., Umer U., Rehman A., Al-Ahmari A.M., & El-Tamimi A.M. (2018). ‘Microchannels Fabrication in Alumina Ceramic Using Direct Nd:YAG Laser Writing’. Micromachines, 9(8), pp. 371.	14
Gangil N., Maheshwari S., Nasr E.A., El-Tamimi A.M., El-Meligy M., & Siddiquee A.N. (2018). ‘Another Approach to Characterize Particle Distribution during Surface Composite Fabrication Using Friction Stir Processing’. Metals, 8(8), pp. 568.	15
Saqib Anwar, Mustafa M Nasr, Abdulrahman Al-Ahmari, Mohammed Alkahtani, Basem Abdo, Abdulaziz El-Tamimi and Saied Darwish (2018) “Rotary ultrasonic drilling of Ti6Al4V: Effects of machining parameters and tool diameter,” Advances in Mechanical Engineering, 10(1): 1–14, DOI: 10.1177/1687814017750784	16
Oussama Karoui, Zhiwu Li, Fellow, IEEE, Naiqi Wu, Senior Member, IEEE, Mohamed Khalgui, Emad Abouel Nasr, and Abdulaziz Mohammed El-Tamimi, (2018) " One-Step Control-Ahead Approach for the Design of an Optimal Petri-net Based Deadlock Prevention Policy", IEEE Access.	17
Basem M.A. Abdo, Saqib Anwar, Abdualziz M. El-Tamimi, Abdulrahman M. Alahmari, Emad Abouel Nasr,(2018) "Laser micro-milling of bio-lox forte ceramic: An experimental analysis", Precision Engineering Vol. 53, pp. 179–193.	18
Ibrahim Alharkan, Khaled Bamatraf, Mohammed A. Noman, Husam Kaid, Emad S. Abouel Nasr, and Abdulaziz M. El-Tamimi, (2018)"An order effect of neighborhood structures in variable neighborhood search algorithm for minimizing the makespan in an identical parallel machine scheduling", Mathematical Problems in Engineering, vol. 2018, Article ID 3586731, 8 pages.	19
Ameen W., Alkahatani M., Mohammed M.K., Abdulhameed O., & El-Tamimi A.M. (2018). ‘Investigation of the effect of buffer storage capacity and repair rate on production line efficiency’. Journal of King Saud University-Engineering Sciences, 30(3), pp. 243-249.	20
Mohammed Alkindi, Sundar Ramalingam, Mohammed Badwelan, Manal A. AlSheddi, Abdulrahman M. Alahmari, Khaja Moiduddin, Emad Abouel Nasr, "In-vivo biocompatibility and functional efficacy of customized electron beam-melted titanium mandibular reconstruction plates",  Journal of Biomaterials and Tissue Engineering, Vol. 8, pp. 1–10, 2018	21
N. Ahmed, K. Ishfaq, M. Rafaqat, S. Pervaiz, S. Anwar, and B. Salah, 2019, EDM of Ti-6Al-4V: Electrode and polarity selection for minimum tool wear rate and overcut, Materials and Manufacturing Processes., Vol. 34, pp. 769–778.	22
M. K. Zia, S. Pervaiz, S. Anwar, W. A. Samad, 2019, Reviewing Sustainability Interpretation of Electrical Discharge Machining Process using Triple Bottom Line Approach, International Journal of Precision Engineering And Manufacturing-Green Technology, Available online at https://doi.org/10.1007/s40684-019-00043-2.	23
A. Mubashar, E. Uddin, S. Anwar, N. Arif, S. Waheed Ul Haq, and M. A. K. Chowdhury, 2018, Ballistic response of 12.7 mm armour piercing projectile against perforated armour developed from structural steel, The Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 233 pp. 1–13.	24
N. Ahmed, S. Pervaiz, S. Ahmad, M. Rafaqat, A. Hassan, M. Zaindin (2019), LBM of aluminum alloy: towards a control of material removal and roughness, The International Journal of Advanced Manufacturing Technology, Volume ??, Issue ??, pp ?, ISSN: 0268-3768.	25
Shahid Bashir, Shafiq Ahmad, Moath Alatefi, Ali Hamza, Mohamed Sharaf, Shirely Fecteau & Woo Kyoung Yoo (2019), Effects of anodal transcranial direct current stimulation on motor evoked potentials variability in humans, Journal of Physiological Reports, vol. 7, issue 13, pp. 1-11, ISSN 2051-817X.	26
Shahid Bashir, Shafiq Ahmad, Moath Alatefi, (2019), An Overview of Transcranial Magnetic Stimulation Research with Bibliometric Indicators, Journal of Nature and Science of Medicine, accepted on 26 March  2019.	27
Shahid Bashir, Shafiq Ahmad, Moath Alatefi, Ali Hamza, Mohamed Sharaf (2018), Quantifying and visualizing the transcranial direct current stimulation research indicators, International Journal of Research in Medical Sciences, vol. 6, issue 12, pp. 4136-4149. ISSN: 2320-6071.	28
Shafiq Ahmad, Ahmed Badwelan, Atef M. Ghaleb, et al., “Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution? Wireless Communications and Mobile Computing, vol. 2018, pp. 1-12. 1530-8669.	29
Mahmuda Akter, Abdullah Gani, Md. Obaidur Rahman, Md. Nazrul Islam, Mohammad Mehedi Hassan, Shafiq Ahmad (2018), “Performance Analysis of Personal Cloud Storage Services for Mobile Multimedia Health Record Management”. IEEE ACCESS, Volume 6, issue 1, pp 52625- 52638. ISSN: 2169-3536.	30
Prem Chhetri, Jonathan Corcoran, Shafiq Ahmad, Kiran KC, (2018) "Examining spatio-temporal patterns, drivers and trends of residential fires in South East Queensland, Australia", Disaster Prevention and Management: An International Journal, Vol. 27 Issue: 5, pp.586-603, ISSN: 0965-3562.	31
Ramadan, M.Z., Khalaf, T.M., Ragab, A.M., and AbdElgawad, A.A. Influence of Shopping Bags Carrying on Human Responses While Walking. Journal of Healthcare Engineering 2018, Article ID 5340592, pp.1-9. Impact Factor= 1.261	32
Mohammed S. Alkahtani, Mohamed Z. Ramadan, Khaled A. Alshaikh, Abdullah A. Aljaweeni and Ahmad S. Altuwaijri, Development and experimental verification of an ergonomic shopping bag handle. Work: A Journal of Prevention, Assessment, & Rehabilitation 2018, 61(1), pp. 1-15. DOI:10.3233/WOR-182786.	33
Mohamed Z. Ramadan and Mohammed H. Alhaag, Evaluating the User Physical Stresses Associated with Watching 3D and 2D Displays over Extended Time Using Heart Rate Variability, Galvanic Skin Resistance, and Performance Measure. Journal of Sensors 2018, Article ID 2632157, pp.1-12. Impact Factor= 2.057.	34
Adel M. Al-Shayea, Mohamed Z. Ramadan, Khalid H. Al-Yami.  Theoretical Framework for Factors Contributing to Unsafe Workplaces and Implementing Work Safety Rrequirements. Multi-Knowledge Electronic Comprehensive Journal for Education and Science Publications (MECSJ), Issue (15), Dec. (2018), pp.1-20.	35
AM Al-Shayea, MZ Ramadan, KH Al-Yami,  (2019) " Structural model of factors contributing to the motivational problem of taking shortcuts at construction workplaces in the Kingdom of Saudi Arabia”, Heliyon, Vol.5, Isuue.2, pp.2-28.	36
Mohammed M. Mabkhot , Sana Kouki Amri , Saber Darmoula , Ali M. Al-Samhana , and Sabeur Elkosantinia, 2019, An ontology based multi criteria decision support system to reconfigure manufacturing systems, IISE Transactions, Taylor & Francis Online DOI: 10.1080/24725854.2019.1597317	37
Ali Alsamhan, Adham E. Ragab, Abdulmajeed DabwanID*, Mustafa M. Nasr, Lotfi Hidri, “Prediction of formation force during single-point incremental sheet metal forming using artificial intelligence techniques”, PLOS ONE | https://doi.org/10.1371/journal.pone.0221341 August 22, 2019.	38
Abbas, A. T., Ragab, A. E., Benyahia, F., & Soliman, M. S. (2018). Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors. Advances in Materials Science and Engineering, 2018.	39
Ghaleb, A. M., Saleh, M. A., Ragab, A. E., Dabwan, A., Khalaf, T. M., & Umer, U. (2019). A new method to produce T-shaped tubular fittings with experimental and simulation results. PloS one, 14(4), e0214608.	40
Alzahrani KS, Nadeem A, Ahmad SF, Al-Harbi NO, Ibrahim KE, El-Sherbeeny AM, Alhoshani AR, Alshammari MA, Alotaibi MR, Al-Harbi MM. Inhibition of spleen tyrosine kinase attenuates psoriasis-like inflammation in mice through blockade of dendritic cell-Th17 inflammation axis. Biomed Pharmacother. Mar. 2019; 111: 347-358 (ISI Impact Factor: 3.743)	41
Mohammed S. Alkahtani, Ahmed M. El-Sherbeeny, Ali Al-Marfadi, Fawaz M. Abdullah (2019) “A Panoramic View of Industrial Engineering: The Case of Saudi Arabia,” The International Journal of Educational Organization and Leadership, 26(1), http://thelearner.com © Common Ground Research Networks, ISSN: 2329-1656 (Print), ISSN: 2329-1591 (Online), http://doi.org/10.18848/2329-1656/CGP/v26i01/1-19 (Article)	42
MA Noman, ESA Nasr, A Al-Shayea, H Kaid  (2018) " Overview of predictive condition based maintenance research using bibliometric indicators”, Journal of King Saud University - Engineering Sciences, in press.	43
Alkahtani, M., Choudhary, A., De, A. and Harding, J. (2019) “A decision support system based on ontology and data mining to improve design using warranty data,” Computers & Industrial Engineering, 128: 1027-1039, https://doi.org/10.1016/j.cie.2018.04.033	44
Alkahtani, M., Rehman, A.U., Al-Zabidi, A., and Choudhary, A. (2018) “Agile supply chain assessment: an empirical study on concepts, research and issues,” Arabian Journal for Science and Engineering, pp 1–15, https://doi.org/10.1007/s13369-018-3299-7	45
Mohammed Alkahtani, Abdulrahman Al-Ahmari, Husam Kaid and Mohammed Sonboa (2019) “Comparison and evaluation of multi-criteria supplier selection approaches: A case study,” Advances in Mechanical Engineering, Vol. 11(1) 1–19, DOI: 10.1177/1687814018822926	46
Mohammed Alkahtani and Husam Kaid (2018) “Supplier selection in supply chain management:  a review study,” Int. J. Business Performance and Supply Chain Modelling, Inderscience Enterprises Ltd., 10(2) 107-130.	47
Mohammed Alkahtani and Aiman Ziout (2019) Design of a sustainable reverse supply chain in a remanufacturing environment: A case study of proton exchange membrane fuel cell battery in Riyadh, Advances in Mechanical Engineering, Vol. 11(4) 1–14.  DOI: 10.1177/1687814019842997 journals.sagepub.com/home/ade	48
Usama Umer, Wadea Ameen, Mustufa Haider Abidi, Khaja Moiduddin, Hisham Alkhalefah, Mohammed Alkahtani, and Abdulrahman Al-Ahmari (2019) Modeling the Effect of Different Support Structures in Electron Beam Melting of Titanium Alloy Using Finite Element Models, 9, 806; doi:10.3390/met9070806, www.mdpi.com/journal/metals	49
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019). Additive manufacturing: Challenges, trends, and applications. Advances in Mechanical Engineering, 11(2).	50
Al-Ahmari, A., Ashfaq, M., Mian, S. H., & Ameen, W. (2019). Evaluation of additive manufacturing technologies for dimensional and geometric accuracy. International Journal of Materials & Product Technology, 58(2-3), 129-154.	51
Ishfaq, K., Ahmad, N., Jawad, M., Ali, M. A., & Al-Ahmari, A. M. (2019). Evaluating Material's Interaction in Wire Electrical Discharge Machining of Stainless Steel (304) for Simultaneous Optimization of Conflicting Responses. Materials, 12(12).	52
Kaid, H., Al-Ahmari, A., El-Tamimi, A. M., Nasr, E. A., & Li, Z. (2019). Design and Implementation of Deadlock Control for Automated Manufacturing Systems. South African Journal of Industrial Engineering, 30(1), 1-23.	53
Mian, S. H., & Al-Ahmari, A. (2019). Comparative analysis of different digitization systems and selection of best alternative. Journal of Intelligent Manufacturing, 30(5), 2039-2067.	54
Mian, S. H., Al-Ahmari, A., & Alkhalefah, H. (2019). Analysis and Realization of Sampling Strategy in Coordinate Metrology. Mathematical Problems in Engineering, 2019.	55
Mohammed, M. K., Umer, U., & Al-Ahmari, A. (2019). Optimization of Nd:YAG laser for microchannels fabrication in alumina ceramic. Journal of Manufacturing Processes, 41, 148-158.	56
A. Ebaid E. R. El-Zahar • A. FAljohani • Bashir Salah •Mohammed Krid • JTenreiro Machado (2019) " Analysis of two-diemensioal fractional projectile motion in view of the experimental data", Nonlinear Dynamics, 2019	57
MOHAMED A. MOHAMED,AMEENA SAAD ALSUMAITI; , MOHAMED KRID; EMAD MAHROUS AWWAD; , AND ABDOLLAH KAVOUSI-FARDA, Reliability-Oriented Fuzzy Stochastic Framework in Automated Distribution Grids to Allocate µ-PMUs, IEEE ACCESS, 2019	58
Nasr M., Anwar S., El-Tamimi A.M., & Pervaiz S. (2018). ‘Minimization of the hole overcut and cylindricity errors during rotary ultrasonic drilling of Ti-6Al-4V’. IOP Conference Series: Materials Science and Engineering, 346(1), pp. 012059.	59
Low, B. K. L., Man, S. S., Chan, A. H. S., & Alabdulkarim, S. (2019). Construction worker risk-taking behavior model with individual and organizational factors. International journal of environmental research and public health, 16(8), 1335.	60
Alabdulkarim, S., Kim, S., & Nussbaum, M. A. (2019). Effects of exoskeleton design and precision requirements on physical demands and quality in a simulated overhead drilling task. Applied Ergonomics, 80, 136-145.	61
Mohammed Mabkhot , Ali M. Al-Samhan, Lotfi Hidri, (2019), “An Ontology-Enabled Case-Based Reasoning Decision Support System for Manufacturing Process Selection”, Advances in Materials Science and Engineering, Volume 2019, Article ID 2505183, 18 pages https://doi.org/10.1155/2019/2505183.	62

Conference Publications 2018-2019

Conference Publication	Sn.
Ahmed M. El-Sherbeeny, Woo Hyung Park, Ergonomic Evaluation of Vehicle License Plates used in Saudi Arabia, Proceedings of the Third European International Conference on Industrial Engineering and Operations Management; Pilsen, Czech Republic, July 23-26, 2019	1
Khaled Al-Ghathbar, M. Ali Louly, Mehdi Mrad (2019), Iterated Local Search in Physician Scheduling problem, The International Conference on Industrial Engineering and Operations Management, Bangkok, Thailand	2
Safa Ben Salem, Ali Balma , Mehdi Mrad , Talel Ladhari, (2019), Stronger bounds for the asymmetric traveling salesman problem, Workshop of the EURO Working Group on Vehicle Routing and Logistics optimization, Spain	3
Abidi M.H., Alkhalefah H., Al-Ahmari A.M., Nasr E.A., & El-Tamimi A.M., (2019). ‘Multimodal Virtual Reality Based Maintenance Training System for Industry 4.0’. 2nd International Conference on Smart and Sustainable Manufacturing, 9-11 April, 2019, Manchester, U.K.	4
Lotfi Hidri, (2018), Mathematical modelling and optimal physicians schedule in an Intensive Care Unit, 13th International Conference on Medical and Health Science (ICMHS 2018), Milan Italy, 29-30 December 2018.	5
Mohammed. M. Mabkhot, Mohamed Krid, Ali M. Al-Samhan & Bashir Salah, 2019, An Ontology for Sensors Knowledge management in Smart Manufacturing System, Industry 4.0 Summit & EXPO, Manchester UK, 10-11 Apr 2019.	6
Bashir Salah, "Design and Simulation Based Validation of a Reconfigurable Manufacturing System" Proceedings of the International Conference on Industrial Engineering and Operations Management Bangkok, Thailand, March 5-7, 2019	7
Mohammed Alkahtani, Alok Choudhary, and Araz Zirar “Are we finally done with the ‘human element’ in Industry 4.0?I”, Track: Emerging Topics in Operations Management, the POMS 30th annual conference, Washington Hilton, Washington, D.C., U.S.A. May 3-6, 2019	8
Mohammed Alkahtani and Mustufa Haider Abidi (2019) Supply Chain 4.0: A Shift in Paradigm, Proceedings of the International Conference on Industrial Engineering and Operations Management Pilsen, Czech Republic, July 23-26, 2019	9
Wong, K., Chan, A. H. S., & Alabdulkarim, S. A. (2019, July). Gender Differences in Risk-Taking-Related Personality Traits and Risk Perception: Implications for Safety Training and Awareness Programs. In International Conference on Applied Human Factors and Ergonomics (pp. 307-316). Springer, Cham.	10
Almaqra, Alwaleed, Mohammed Almuqri, Abdullah Alshathri, Abdullah Aloraini, Yousef Alrehaili, Abdulaziz Bin-Mubarak, Saad Alabdulkarim, and Adham Ragab. "Effect of caffeine consumption and air temperature on student performance." In Proceedings of the 10th International Conference on E-Education, E-Business, E-Management and E-Learning, pp. 250-254. ACM, 2019.	11

Past Journals Publications

1. Emad Abouel Nasr, Abdulaziz M. El-Tamimi, Abdulrahman Al-Ahmari, and Husam Kaid, " Comparison and Evaluation of Deadlock Prevention Methods for Different Size Automated Manufacturing Systems", Mathematical Problems in Engineering, 2015 (In Press)

2. Xiaoliang Chena, Gaiyun Liua, Naiqi Wub, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, Emad S Abouel Nasr, " Confusion Control in Generalized Petri Nets Using Synchronized Events", Mathematical Problems in Engineering, 2015 (In Press)

3. YiFan Hou, ZhiWu Li, A.M. Al-Ahmari, A.M. El-Tamimi and Emad Abouel Nasr (2014). ‘Extended Elementary Siphons and Their Application to Liveness-Enforcement of Generalized Petri Nets’. Asian Journal of Control, Vol. 16(6), pp. 1789-1810.

4. Chen X., ZhiWu Li, Naiqi Wu, A.M. Al-Ahmari, A.M. El-Tamimi, Emad Abouel Nasr (2014). ‘Confusion avoidance for discrete event systems by P/E constraints and supervisory control’. IMA Journal of Mathematical Control and Information, 10.1093/imamci/dnu041

5. Al-Ahmari, A., Nasr, E. A., Moiduddin, K., Anwar, S., Kindi, M. A., & Kamrani, A. (2015). A comparative study on the customized design of mandibular reconstruction plates using finite element method. Advances in Mechanical Engineering, 7(7), 1-11.

6. Nasr, E. A., Al-Ahmari, A. M., Alkhawashki, H., Altamimi, A., & Alkhuraisi, M. (2015). Developing a methodology for analysis and manufacturing of proximal interphalangeal (PIP) joint using rapid prototyping technique. Rapid Prototyping Journal, 21(4), 449-460.

7. S. H. Mian, M. A. Mannan, and A. Al-Ahmari (2015) "Accuracy of a reverse-engineered mould using contact and non-contact measurement techniques," International Journal of Computer Integrated Manufacturing, 28 (2015) 419-436.

8. Al-Ahmari, A. M. A., & Aalam, J. (2015). Optimizing parameters of freeform surface reconstruction using CMM. Measurement, 64(0), 17-28

9. M. Qin, Z. Li, and A. M. Al-Ahmari, (2015) "Elementary-Siphon-Based Control Policy for Flexible Manufacturing Systems with Partial Observability and Controllability of Transitions," Asian Journal of Control, 17 (2015) 327-342.

10. Umer, U., Ashfaq, M., Qudeiri, J. A., Hussein, H. M. A., Danish, S. N., & Al-Ahmari, A. R. (2015). Modeling machining of particle-reinforced aluminum-based metal matrix composites using cohesive zone elements. The International Journal of Advanced Manufacturing Technology. 78, 1171-1179.

11. Kamrani, A., Abouel Nasr, E., Al-Ahmari, A., Abdulhameed, O., & Mian, S. (2015). Feature-based design approach for integrated CAD and computer-aided inspection planning. The International Journal of Advanced Manufacturing Technology, 76(9-12), 2159-2183.

12. Ahmed, N., Darwish, S., Alahmari, A. M., & Salik, K. (2015). Laser Ablation Process Competency to Fabricate Microchannels in Titanium Alloy. Materials and Manufacturing Processes, 30(11), 1290-1297.

13. Bouras, and L. Tadj, "Production planning in a three-stock reverse-logistics system with deteriorating items under a periodic review policy", Journal of Industrial and Management Optimization (JIMO), Volume 11, Number 4, October 2015 pp. 1041-1058 (IF: 0.843)

14. Bouras,”Quality tools to improve the communication level in the surgery department at a local hospital”, Computers in Human Behavior 51 (2015) 843–851 (IF: 2.694).

15. Derhab and A. Bouras, “Multivariate correlation analysis and geometric linear similarity for real-time intrusion detection systems”, SECURITY AND COMMUNICATION NETWORKS (2015); 8:1193–1212 (IF: 0.720)

16. Bouras,”Optimal Control for Advertised Production Planning in a Three-Level Stock System with Deteriorating Items: Case of a Continuous-Review Policy”, Arabian Journal for Science and Engineering, September 2015, Volume 40, Issue 9, pp 2829-2840

17. M. Krid, F. Benamar and Z. Zamzami, 2015, Design of an active device for controlling lateral stability of fast mobile robot, Robotica, 23 pages

18. Lemine O. M. and Louly M.A., Application of neural network technique to high energy milling process for synthesizing ZnO nanopowders. Journal of Mechanical Science and Technology, 2014. Vol. 28, no 1, p. 1-6.

19. Gharbi A., Labidi M., Louly, M.A., The Nonpermutation Flowshop Scheduling Problem: Adjustment and Bounding Procedures," Journal of Applied Mathematics, vol. 2014, Article ID 273567, 14 pages, 2014. doi:10.1155/2014/273567.

20. Hidri L., Gharbi A., Louly, M.A. Efficient Bounding Schemes for the Two-Center Hybrid Flow Shop Scheduling Problem with Removal Times," The Scientific World Journal, vol. 2014, Article ID 605198, 7 pages, 2014. doi:10.1155/2014/605198.

21. Mrad M., Chebbi O., Labidi M., Louly M.A. Mohamed, Synchronous Routing for Personal Rapid Transit Pods. Journal of Applied Mathematics. Volume (2014), 8 pages. DOI: 10.1155/2014/623849.

22. Labidi M., Mrad M., Gharbi A., Louly, M.A., Scheduling IT Staff at a Bank: A Mathematical Programming Approach. Scientific World Journal, 2014. DOI: 10.1155/2014/768374.

23. Mehdi Mrad (2015) " An arc flow-based optimization approach for the two-stage guillotine strip cutting problem " Journal of the Operational Research Society (doi:10.1057/jors.2015.8) impact factor : 1.246

24. Mehdi Mrad, Lotfi Hidri (2105)" Optimal consumed electric energy for a personal rapid transition transportation system". Computers and Industrial Engineering, 79 1–9. Impact factor 2.412

25. Anis Gharbi, Mohamed Haouari, Mohamed Labidi (2015), "An Exact Approach for Single Machine Scheduling with Unavailability Periods", European Journal of Industrial Engineering, Vol 9, pp. 244-260. Impact factor: 1.5

26. Anis Gharbi, Mohamed Labidi (2014), “New Approaches for Flow Shop Scheduling”, The Business Review Cambridge, Vol 22, pp. 176-181.

27. Lotfi Hidri, Anis Gharbi, Mohamed Aly Louly (2014), " Efficient bounding schemes for the two-center hybrid flow shop scheduling problem with removal times", The Scientific World Journal, doi:10.1155/2014/605198. Impact factor: 1.29

28. Anis Gharbi, Mohamed Labidi, Mohamed Aly Louly (2014), "The Non-Permutation Flowshop Scheduling Problem: Adjustment and Bounding Procedures", Journal of Applied Mathematics, doi:10.1155/2014/273567. Impact factor: 0.72

29. Mohamed Labidi, Mehdi Mrad, Anis Gharbi, Mohamed Aly Louly (2014), "Scheduling IT Staff at a Bank: A Mathematical Programming Approach", The Scientific World Journal, doi:10.1155/2014/768374 Impact factor: 1.29

30. Anis Gharbi, Mohamed Labidi, Mohamed Haouari (2015),”An Exact Approach for Single Machine Scheduling with Unavailability Periods”, European Journal of Industrial Engineering, Vol. 9, 244–260. TR impact factor: 1.554

31. Anis Gharbi, Mohamed Labidi, Mohamed Ali Louly (2014), “The Non-Permutation Flow Shop Scheduling problem: Adjustment and Bounding procedures”. Journal of Applied Mathematics, vol. 2014, doi: 10.1155/2014/273567. TR impact factor: 0.72

32. T. Ibatan, M.S. Uddin, and M.A.K. Chowdhury, 2015, Recent development on surface texturing in enhancing tribological performance of bearing sliders, Surface and Coatings Technology, Vol. 272, pp. 102-120. [Publisher: Elsevier]

33. Ramadan, M.Z., & Zaki, R.M. "Effects of Attention Type, Task-Type and Complexity on CRT Displays in Supervisory Process Control," International Journal of Engineering & Technology Research Volume 3, Issue 1, January-February, 2015, pp. 16-34.

34. Ramadan, M. Z., & Al-Saleh, Khalid "The Association of Sleep Deprivation on the Occurrence of Errors by Nurses Who Work the Night Shift," International Journal of Engineering & Technology, Vol.15 No.1, pp. 1-6.

35. Bayar, N., Darmoul, S., Gabouj, S.-H., Pierreval, H., (2015). Fault Detection, Diagnosis and Recovery Using Artificial Immune Systems: A Review. Accepted in Engineering Applications of Artificial Intelligence (ISI, 2014 5-year Impact Factor: 2.503).

36. Gheriani, N., Elkosantini, S., Darmoul, S., Ben Said, L., (2015). Assessment of public transport control systems: a comparative analysis of platforms and a new platform architecture. Accepted in the International Journal of Shipping and Transport Logistics (ISI, 2014 5-year Impact Factor: 1.84).

37. Ahmed Nadeem, Naif O. Al-Harbi, Mohamed M. Al-Harbi, Ahmed M. El-Sherbeeny, Sheikh F. Ahmad, Nahid Siddiqui, Mushtaq A. Ansari, Khairy M.A. Zoheir, Sabry M. Attia, Khaled A. Al-Hosaini, Shakir D. Al-Sharary. “Imiquimod-induced psoriasis-like skin inflammation is suppressed by BET bromodomain inhibitor in mice through RORC/IL-17A pathway modulation.” Pharmacological Research. Volume 99, September 2015, Pages 248–257. Journal Impact Factor: 4.408.

38. Subash Babu, A., Nalnikar, N., Rehman, A.U. and Sharaf, M.A.F., 2014,‘A multistage methodology catering to different failure modes for estimating the failure intensity of software: an empirical study’, Int. J. Productivity and Quality Management, Vol. 13, No. 3, pp.272–288

39. Al-Ahmari, Abdulrahman; Abouel Nasr, Emad; Moiduddin, Khaja; Anwar, Saqib; Al Kindi, Mohammed; Kamrani, Ali; "A Comparative Study on the Customized Design of Mandibular Reconstruction Plates Using Finite Element Method", Advances in Mechanical Engineering, Vol. 7, Issue 7, pp. 1-11, 2015.

40. Emad Abouel Nasr, Al-Ahmari, Abdurahman Mushabab, Alkhawashki, Hazem; Altamimi, Abdulsalam; Alkhuraisi, Mohammed, "Developing A Methodology for Anylasis and Manufacturing of Proximal Interphalangeal (PIP) joint using Rapid Prototyping Technique", Rapid Prototyping Journal, Vol. 21 Issue 4, pp.449 - 460 – 2015.

41. Ali Kamrani, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Osama Abdulhameed, Syed Hammad Mian, “Feature-Based Design Approach for Integrated CAD and Computer-Aided Inspection Planning”, Advanced Manufacturing Technology, Vol. 76 Issue 9-12, pp. 2159-2183. Feb 2015.

42. Emad Abouel Nasr, Abdulaziz M. El-Tamimi, Abdulrahman Al-Ahmari, and Husam Kaid, " Comparison and Evaluation of Deadlock Prevention Methods for Different Size Automated Manufacturing Systems", Mathematical Problems in Engineering, 2015 (In Press)

43. Xiaoliang Chena, Gaiyun Liua, Naiqi Wub, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, Emad S Abouel Nasr, " Confusion Control in Generalized Petri Nets Using Synchronized Events", Mathematical Problems in Engineering, 2015 (In Press)

44. Mehdi Mrad, Lotfi Hidri, (2015), “Optimal consumed electric energy while sequencing vehicle trips in a personal rapid transit transportation system”, Computers & Industrial Engineering, 79, 1-9.

45. L. Hidri, A. Gharbi, Mohamed Aly Louly (2014) , “Efficient heuristic and lower bound for the two centers hybrid flow shop scheduling problem with removal times”, The Scientific World Journal, Volume 2014 (2014), Article ID 605198 , 7 pages.

46. Lemine O. M. and Louly M.A., Application of neural network technique to high energy milling process for synthesizing ZnO nanopowders. Journal of Mechanical Science and Technology, 2014. Vol. 28, no 1, p. 1-6.

47. Gharbi A., Labidi M., Louly, M.A., The Nonpermutation Flowshop Scheduling Problem: Adjustment and Bounding Procedures," Journal of Applied Mathematics, vol. 2014, Article ID 273567, 14 pages, 2014. doi:10.1155/2014/273567.

48. Hidri L., Gharbi A., Louly, M.A. Efficient Bounding Schemes for the Two-Center Hybrid Flow Shop Scheduling Problem with Removal Times," The Scientific World Journal, vol. 2014, Article ID 605198, 7 pages, 2014. doi:10.1155/2014/605198.

49. Hidri L., Gharbi A., Louly, M.A. Efficient Bounding Schemes for the Two-Center Hybrid Flow Shop Scheduling Problem with Removal Times," The Scientific World Journal, vol. 2014, Article ID 605198, 7 pages, 2014. doi:10.1155/2014/605198.

50. Mrad M., Chebbi O., Labidi M., Louly M.A. Mohamed, Synchronous Routing for Personal Rapid Transit Pods. Journal of Applied Mathematics. Volume (2014), 8 pages. DOI: 10.1155/2014/623849.

51. Labidi M., Mrad M., Gharbi A., Louly, M.A., Scheduling IT Staff at a Bank: A Mathematical Programming Approach. Scientific World Journal, 2014. DOI: 10.1155/2014/768374.

52. Abdulrahman Al-Ahmari, Emad Abouel Nasr, Khaja Moiduddin, Saqib Anwar, Mohammed Al Kindi, Ali Kamrani, 2015, A comparative study on the customized design of mandibular reconstruction plates using finite element method. Advances in Mechanical Engineering, Vol. 7(7), pp. 1–11.

53. J. Qudeiri, F Khadra, H Hussen, A Alahmari, S M Darwish, , M Abidi “Layout design optimization of dynamic environment flexible manufacturing system” J of Advances in Mechanical Engineering, ( ISI Journal) , 2015.

54. Naveed A, Darwish S M, Alahmari, A.A., M. A. Shar “Micro-channels by Nd: YAG laser beam machining: fabrication, microstructures, and micro-hardnes profiles", Int. Journal of advanced Manufacturing Technology, Processes ( ISI Journal) May (2015).

55. Naveed A, Darwish S M, Alahmari, A.A Salik K.., Laser Ablation Competancy to Fabricate Micro-channels in Taitanum Alloy, “ Int Journal of Materials and Manufacturing” Processes ( ISI Journal) June 2015.

56. Darwish S M ,Naveed A, Alahmari A.A., Muffti, N.A., “A comparison of laser beam machining: of micro-channels under dry and wet medium,s", Int. Journal of advanced Manufacturing Technology, Processes ( ISI Journal) August (2015).

57. Alahmari A.A, ,Naveed A Darwish S M,., “laser beam micro- machining: of under water immersion", Int. Journal of advanced Manufacturing Technology, Processes ( ISI Journal) August (2015).

58. M. Usman S. M. H. Darwish, , “Development and Analysis of Different Density Auxetic Cellular Structures” Int. J. of Recent and Innovation trends in Comuting and Communication, IJRTCC, Vol.3, issue 1, 2015.

59. S.M. Darwish,S.. M. Elseufy, A. Ahmed” Finite Element Analysis of an Automobile Engine Hood”, The Journal of Management Engineering Integration, vol.7, issue 1, 2014

60. S. M. H. Darwish, M. Usman, Auxetic Cellular Structures for Custom Made Orthopedic Implants using Additive Manufacturing , International Journal of Engineering and Advanced Technology™ (IJEAT), 2014.

61. S. Elkosantini and A. Frikha, Decision fusion for signalized intersection control, international journal of cybernetics, systems and management sciences, volume 44, issue 1, 2015 (ISI, Impact Factor : 0.416)

62. S. Elkosantini, Toward a new generic behavior model for human centered system simulation, Simulation Modelling Practice and Theory, 2015 (ISI, Impact Factor: 1.159).

63. N. Gheriani, S. Elkosantini, S. Darmoul, L. Ben Said, Evaluation platform architecture for public transport control systems: a comparative analysis and a new platform, International Journal of Shipping and Transport Logistics, 2015 (ISI, Impact Factor: 1.319)

64. Shady Aly , Ivan Vrana & Martin Pelikán (2014), A Generalized Model for Quantifying Ambience Intelligence Impact on

65. Smart Workplaces: Application in Manufacturing, Journal of Ambient Intelligence and Smart Environments (JAISE

66. (Accepted). Journal of Ambient Intelligence and Smart Environments 6, (2014) 651–673, DOI 10.3233/AIS-140291, IOS Press (ISI, 1.08).

67. Anis Gharbi, Talel Ladhari, Mohamed Kais Msakni, Mehdi Serairi (2013), " The Two-Machine Flowshop Scheduling Problem with Sequence-Independent Setup Times: New Lower Bounding Strategies", European Journal of Operational Research, Vol 231, pp. 69-78.

68. Anis Gharbi (2013), "Scheduling Maintenance Actions for Gas Turbines Aircraft Engines", International Journal of Mechanical, Industrial Science and Engineering, Vol 7, pp. 224-226.

69. Anis Gharbi, Mohamed Haouari, Talel Ladhari, Mohamed Ali Rakrouki (2013), "An Effective Genetic Algortihm for a Complex Real-World Scheduling Problem", International Journal of Mechanical, Industrial Science and Engineering, Vol 7, pp. 281-284.

70. Afify, A.A. A novel algorithm for fuzzy rule induction in data mining. Journal of Mechanical Engineering Science (IMechE, Part C), 2014, 228 (5), 877-895 (ISI Journal).

71. Abouel Nasr, E., Osman, M., Abd Elatty, S. and Afify, A.A. Scheduling Flow Shop Manufacturing Systems Considering Agility Issues. International Journal of Collaborative Enterprise, 2014 (In press).

72. Xiao-liang Chen, Zhi-wu Li, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, Emad S. Abouel Nasr, "Confusion Diagnosis And Control Of Discrete Event Systems Using Synchronized Petri Nets", Asian Journal of Control, Vol. 15, Issue 6, pp. 1736–1751, 2013.

73. Abdul Aziz El-Tamimi, Khalid Al-Zahrani; “An improved quadratic program for unweighted Euclidean 1-center location problem”; Journal of King Saud University – Engineering Sciences; , V25, No.2, pp161-165; 2013.

74. Abidi M.H., El-Tamimi A.M., Darwish S.M., Al-Ahmari A.M. & Ahmad A. ‘Evaluation of a Virtual Prototype of the First Saudi Arabian Car’. Journal of Management and Engineering Integration (Accepted). 2013.

75. Abidi M.H., El-Tamimi A.M., Al-Ahmari A.M., & Nasr E.S. ‘Assessment and comparison of immersive virtual assembly training system’. International Journal of Rapid Manufacturing, Vol. 3(N4), pp. 266-283. 2013.

76. Rasheed M.S., Abidi M.H., El-Tamimi A.M., Al-Ahmari A.M. ‘Investigation of Micro-EDM Input Parameters on Various Outputs in Machining Ni-Ti Shape Memory Alloy using Full Factorial Design’. Advanced Materials Research, Vol. 816 – 817, pp. 173-179. (2013). [ISI]

77. Basem M.A. Abdo, S.M. Darwish, Al-Ahmari A.M., A.M. El-Tamimi; “Optimization of Process Parameters of Rotary Ultrasonic Machining based on Taguchi’s Method”;Advanced Materials Research; V748, pp273-280. 2013. [ISI]

78. Abidi M.H., El-Tamimi A.M., Nasr E.S.A. & Al-Ahmari A.M. ‘Virtual Assembly in a Semi-immersive Environment’. World Academy of Science, Engineering and Technology, Vol. 74, pp. 779-788. 2013.

79. Abidi M.H., El-Tamimi A.M., Al-Ahmari A.M., Darwish S.M., & Rasheed M.S. ‘Virtual Ergonomic Assessment of First Saudi Arabian Designed Car in a Semi-Immersive Environment’. Procedia Engineering, Vol. 64, pp. 622-631. (2013).

80. Lemine O. M. and Louly M.A., Application of neural network technique to high energy milling process for synthesizing ZnO nanopowders. Journal of Mechanical Science and Technology, 2014. Vol. 28, no 1, p. 1-6.

81. Derhab, A. Bouras, “Multivariate Correlation Analysis and Geometric Linear Similarity for Real-time Intrusion Detection Systems”, accepted for publication at Security and Communication Networks, July 2014. (Impact factor = 0.311)

82. Bouras and S. Bendak, "Managing IT Projects in Public Companies: A Case Study", Journal of Engineering, Project, and Production Management, 4(2), 74-80, 2014.

83. Darmoul, S., Elkosantini, S. (2014). Artificial Immunity to Control Disturbances in Public Transportation Systems: Concepts, Mechanisms and a Prototype Implementation of a Knowledge-Based Decision Support System.

84. Knowledge-Based Systems. http://dx.doi.org/10.1016/j.knosys.2014.02.022. (ISI, 2012 Impact Factor: 4.104).

85. Subash Babu, A., Nalnikar, N., Rehman, A.U. and Sharaf, M.A.F. (2014) ‘A multistage methodology catering to different failure modes for estimating the failure intensity of software: an empirical study’, Int. J. Productivity and Quality Management, Vol. 13, No. 3, pp.272–288.

86. Ateekh-Ur-Rehman and Al-Ahamri, A. (2013) ‘Evaluation of alternative industrial robots using AHP and ELECTRE: a comparative study’, Int. J. Industrial and Systems Engineering, Vol. 14, No. 1, pp.58–73. DOI: 10.1504/IJISE.2013.052921

87. Ateekh-Ur-Rehman, Al-Ahamri, A. and Subash Babu A. (2013) ‘Editorial: Multi-Criteria Decision Analysis In Manufacturing Systems’, Int. J. Industrial and Systems Engineering, Vol. 14, No. 1, pp 1-4. DOI: 10.1504/IJISE.2013.052921

88. Subash Babu, A., Sanghi, U., Rehman, A.U., AL-Shayea, A.M. and Sharaf, M.A.F. (2013) ‘A model to derive software maintenance policy decision’, Int. J. Productivity and Quality Management, Vol. 11, No. 3, pp.247–268. DOI: 10.1504/IJPQM.2013.052944

89. Rehman A. U and Al-Ahmari, A. (2013) ‘Assessment of alternative industrial robots using AHP and TOPSIS’, Int. J. of Industrial and Systems Engineering, 2013 Vol.15, No.4, pp.475 – 489, DOI: 10.1504/IJISE.2013.057481

90. Dr Mohamed Sharaf, Identification of Top Competencies Required from Engineering Graduates: A Case Study of Saudi Arabia, International Journal of Engineering Education Vol. 29, No. 4, pp. 967–973, 2013 0949-149X/91.(ISI Journal)

91. Dr Mohamed Sharaf, Designing a new School Furniture Suitable for Saudi Students,” Journal of the World Academy of Science, (Engineering and Technology), 2013, Vol. 74, No. 2, pp. 41-48.

92. Anis Gharbi, Mohamed Labidi, Mohamed Haouari (2014), ”An Exact Approach for Single Machine Scheduling with Unavailability Periods”, European Journal of Industrial Engineering, in Press.

93. Mohamed Labidi, Mehdi Mrad, Anis Gharbi, Mohamed Ali Louly (2014), “Scheduling IT Staff at a Bank: A Mathematical Programming Approach”, The Scientific World Journal – Operations Research, vol. 2014, doi:10.1155/2014/768374.

94. Mehdi Mrad, Olfa Chebbi, Mohamed Labidi, Mohamed Ali Louly (2014), “Synchronous Routing for Personal Rapid Transit Pods”, To appear in Journal of Applied Mathematics (Special Issue: Recent Advances on Mathematical Modeling and Control Methods for Complex Vehicle Systems), vol. 2014, doi: 10.1155/2014/623849.

95. Awais Ahmad Khan, Emad Samir Abouel Nasr, Abdul-Rehman Al-Ahmari, Ali Kamrani, H.M.A Hussein, " An Automatic Fixture Design System For Prismatic Parts", South African Journal of Industrial Engineering, 2014, (Accepted)

96. Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani , Awais Khan, "An Automatic Fixture Modeling System Using Search Strategy", Journal of Engineering Manufacture, 2014, (Accepted)

97. Emad Abouel Nasr, Ashraf Afify, Mohammed Osman, Soha Abd Elatty, "Scheduling Flow Shop Manufacturing Systems Considering Agility Issues", International Journal of Collaborative Enterprise, 2014. (In print)

98. Emad. S. Abouel Nasr, Adham E. Ragab, Hussein M. Hussein, Ali K. Kamrani, "A Feature-Based Approach To An Integrated CAD/CAPP System In Sheet Metal Blanking Dies", International Journal of Rapid Manufacturing, 2014, (In print)

99. Emad Abouel Nasr, Al-Ahmari, Abdurahman Mushabab; Alkhawashki, Hazem; Altamimi, Abdulsalam; Alkhuraisi, Mohammed, "Developing A Methododlgy for Anylasis and Manufacturing of Proximal Interphalangeal (PIP) joint using Rapid Prototyping Technique", Rapid Prototyping Journal, 2014, (In print)

100. Hussein M.A. Hussein, Wang J. Fengyin, Emad S. Abouel Nasr, "Development of a Generic Method for recognizing 2D Shapes in a CAD system", Australian Journal of Basic and Applied Sciences, 8(1), pp. 358-369, January 2014.

101. Haitham A. Mahmoud, Mohammed H. Hassan, Emad S. Abouel Nasr, "Developing a hybrid genetic algorithm solution to optimise multi-echelon supply chains", International Journal of Collaborative Enterprise, Vol. 3, No. 4, pp. 287-312, 2013.

102. Mehdi Mrad, Lotfi Hidri (2014)" Optimal consumed electric energy for a personal rapid transition transportation system". accepted with minor revision in Computers and Industrial Engineering

103. Mehdi Mrad, Anis Gharbi, Mohamed Haouari, Mohamed Kharbeche (2014) " Google Challenge 2011-2012: An Approximate Decomposition Algorithm for Machine Reassignment" accepted with minor revision in Annals of Operations Research special issue on the ROADEF/EURO challenge 2012 on machine reassignment problems. (2013(

104. Mehdi Mrad (2014) "An arc flow model for the two-stage strip packing problem " accepted with minor revision to JORS.

105. Mohamed Labidi , Mehdi Mrad, Anis Gharbi, Lotfi Hidri and Mohamed louly (2014) " A Shift Scheduling Model for a Bank IT Staff " The Scientific World Journal , Volume 2014, Article ID 768374, 10 pages, htpp://dx.doi.org/10.1155/2014/768374.

106. Mian, Syed Hammad, Al-Ahmari, Abdulrahman (2014) “Enhance performance of inspection process on Coordinate Measuring Machine” MEASUREMENT, Vol. 47, pp. 78-91.

107. Umer U. ,Abu Qudeiri J., Hussein H., Khan A., Al-Ahmari A. M. A (2014) ‘Multi-objective optimization of oblique turning operations using finite element model and genetic algorithm “ INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 71, pp. 593-603.

108. Karim, Mohammad Rezaul, Islam, Ashraful, Akhtaruzzaman, M. D., Han, Liyuan, Al-Ahmari, A. M. A (2013) “Multiwall Carbon Nanotube Coated with Conducting Polyaniline Nanocomposites for Quasi-Solid-State Dye-Sensitized Solar Cells” JOURNAL OF CHEMISTRY, To be bublished: 2013

109. Hariga, Moncer A., Al-Ahmari, A. M. A (2013) “An integrated retail space allocation and lot sizing models under vendor managed inventory and consignment stock arrangements” COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 64, pp. 45-55.

110. Chen, YuFeng, Li, ZhiWu, Al-Ahmari, Abdulrahman (2013) “Nonpure Petri Net Supervisors for Optimal Deadlock Control of Flexible Manufacturing Systems” IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS, Vol. 43, pp. 252-265.

111. Mustufa Haider Abidi, Abdulaziz M. El-Tamimi, Abdulrahman M. Al-Ahmari, Emad S. Abouel Nasr, "Assessment and comparison of immersive virtual assembly training system", International Journal of Rapid Manufacturing, Vol. 3, No. 4, pp. 266-283, 2013.

112. Qi Wang, Zhiwu Li, Anrong Wang, Abdulrahman M. Al-Ahmari, Abdul-Aziz Mohammed El-Tamimi, Emad Abouel Nasr, "A versatile supervisor with one monitor based on macro-tokens", The IMA Journal of Mathematical Control and Information, 2014, Vol. 31 No. 2 Pg. 245-256.

113. Khalaf, T., Karwowski, W., and Sapkotab, N. (2014). A nonlinear dynamics of trunk kinematics during manual lifting tasks. Work: A Journal of Prevention, Assessment and Rehabilitation (in press(

114. Adel AlSahyea, A modified backpack design for male school children”, Int. J. of Industrial Ergonomics, vol 43, No. 5, pp.462-471.

115. Ramadan, M. Z., 2012, “Effects of Protective Respiratory Devices and Physical Workloads in Harsh Weather Conditions on Individuals' Physiological Measures and Exertion Ratings,” WORK: A Journal of Prevention, Assessment, & Rehabilitation, Vol 42, No 3, pp.435-445.

116. Al-Harkan, I.M., Ramadan, M.Z., Sharaf, M.A., and Helmy, H.A., 2013, “Designing a new School Furniture Suitable for Saudi Students,” World Academy of Science, Engineering and Technology, Vol 74, No 2, pp. 41-48.

117. Ramadan, M. Z., Al-Shayea, Adel, 2013, “A Modified Backpack Design for Male School Children” International Journal of Industrial Ergonomics, In Press.

118. Ali Ahmad and Abdulrahman Al_Ahmari, Quality Function Deployment on user-centered Design. The Journal of Management and Engineering Integration Vol. 5, No. I.

119. Ali Ahmad and Abdulrahman Al_Ahmari, Assessment of Cycle Time Reduction Using Monte Carlo Simulation, The Journal of Management and Engineering Integration Vol. 5, No. I.

120. Wahyudin P. Syam, Huda A. Al-Shehri, A.M. Al-Ahmari, Khalid A. Al-Wazzan, M.A. Mannan, (2012),"Preliminary fabrication of thin-wall structure of Ti6Al4V for dental restoration by electron beam melting", Rapid Prototyping Journal, Vol. 18 Iss: 3 pp. 230 – 240.

121. H. R. Ammar • A. M. Samuel • F. H. Samuel • A. M. A. Al-Ahmari Aging behavior of 359-type Al–9%Si–0.5%Mg casting alloys, J Mater Sci (2012) 47:1331–1338.

122. Anis Gharbi, Amira Mahjoubi (2013), "New Lower Bounds for Flow Shop Scheduling", International Journal of Humanities and Management Sciences, Vol 1, pp. 28-32.

123. Anis Gharbi, Talel Ladhari, Mohamed Kais Msakni, Mehdi Serairi, " The Two-Machine Flowshop Scheduling Problem with Sequence-Independent Setup Times: New Lower Bounding Strategies", European Journal of Operational Research, in press.

124. Ateekh-Ur-Rehman (2013), ‘Manufacturing Configuration Selection using Multi-Criteria Decision Tool’, Int J Adv Manuf Technol (2013) 65:625 –/639 DOI 10.1007s00170-012-4201-5 (ISI).

125. Ateekh-Ur-Rehman and A Suabsh Babu (2013), ‘Reconfigurations of Manufacturing Systems– An Empirical Study on Concepts, Research and Applications’, International Journal of Advance Manufacturing Technology (IJAMT), Vol 66 pp 107-124 DOI 10.1007/s00170-012-4310-1. (ISI).

126. Subash Babu, A., Sanghi, U., Rehman, A.U., AL-Shayea, A.M. and Sharaf, M.A.F. (2013) ‘A model to derive software maintenance policy decision’, Int. J. Productivity and Quality Management, Vol. 11, No. 3, pp.247–268.

127. Ateekh-Ur-Rehman and Al-Ahamri, A. (2013) ‘Evaluation of alternative industrial robots using AHP and ELECTRE: a comparative study’, Int. J. Industrial and Systems Engineering, Vol. 14, No. 1, pp.58–73.

128. Ateekh-Ur-Rehman, Al-Ahamri, A. and Subash Babu A. (2013) ‘Editorial: Multi-Criteria Decision Analysis In Manufacturing Systems’, Int. J. Industrial and Systems Engineering, Vol. 4, No. 1, pp 1-4.

129. Rehman A. U, Usmani Y S and Al-Ahmari, A.M.A. (2012) ‘A study to assess significance of project management performance: assessment model in applied projects’, Int. J. Applied Systemic Studies, Vol. 4, No. 3, pp.140–149.

130. Ateekh-Ur-Rehman and Yusuf Usmani (2012), ‘Field engineers’ scheduling at oil rigs: a case study’, ETASR - Engineering, Technology & Applied Science Research Vol. 2, No. 1, 2012, 155-161.

131. A Subash Babu, N Nalnikar, Ateekh-Ur-Rehman, and Mohamed Abdel Fattah Sharaf, (2013) “A Multistage Methodology Catering To Different Failure Modes for Estimating the Failure Intensity of Software: An Empirical Study”, Int. J. Productivity and Quality Management, (Accepted for publication in year 2012 and now paper is in Press).

132. Al-Ahmari, A. and Ateekh-Ur-Rehman (2013) ‘Assessment of alternative industrial robots using AHP and TOPSIS’, Int. J. Industrial and Systems Engineering,(Accepted for publication in year 2012 and now paper is in Press).

133. Mohamed Haouari, Nelson Maculan, Mehdi Mrad " Enhanced Compact Models for the Connected Subgraph Problem and for the Shortest Path Problem in Digraphs with Negative Cycles" Computers and Operations Research http://dx.doi.org/10.1016/j.cor.2013.01.002.

134. A. Bouras, W. P. Syam « Hybrid Chaos Optimization and Affine Scaling Search for solving Linear Programming », Applied Soft Computing. 05/2013; 13(5):2703–2710. (Impact Factor: 2.612).

135. Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Osama Abdulhameed, “Developing An Intelligent System for Generation Inspection Planning from CAD System”, Advanced Manufacturing Technology, (Under Review).

136. Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Osama Abdulhameed, ”An Intelligent System for Computer Aided Inspection Planning”, International Journal of Production Research, (Under Review).

137. Shady Aly & Ivan Vrana& Martin Pelikán (2013) A Generalized Model for Quantifying Ambience Intelligence Impact on Smart Workplaces: Application in Manufacturing, Journal of Ambient Intelligence and Smart Environments (JAISE)(Accepted).

138. Ghassan Kbar, Shady Aly, Abdul Aziz AlDusrai (2013), Effective Knowledge Based Economy Model for Science Park, 9th International Conference on Networked Computing and Advanced Information Management, Jeju Island, Republic of Korea.

139. Ghassan Kbar, Abdul Aziz AlDusrai, Shady Aly (2013), Smart Mobile and Context Aware Applications at Science Park, the 30th International Association for Science Parks and Areas of Innovation (IASP) World Conference on Science and Technology Parks, 4-17, Oct., 2013, Recife, Brazil.

140. Darmoul, S., Pierreval, H., Gabouj, S.–H. (2012). Handling Disruptions in Manufacturing Systems: an Immune Perspective. Engineering Applications of Artificial Intelligence. (ISI, Impact Factor: 1.66) http://dx.doi.org/10.1016/j.engappai.2012.09.021

141. Afify, A.A. A novel algorithm for fuzzy rule induction in data mining. Journal of Mechanical Engineering Science (IMechE, Part C), 2013 (In press).

142.        Mian, S. H., & Al-Ahmari, A. M. Application of the sampling strategies in the inspection process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume: 231 issue: 4, page(s): 565-575 March 1, 2017

143.        Abouel Nasr, E., Al-Ahmari, A. M., Moiduddin, K., Al Kindi, M., & Kamrani, A. K. (2017). A digital design methodology for surgical planning and fabrication of customized mandible implants. Rapid Prototyping Journal, 23(1), 101-109.

144.        Al-Ahmari, A. (2016). Optimal robotic cell scheduling with controllers using mathematically based timed Petri nets. Information Sciences, 329, 638-648

145.        Chen, Y., Li, Z., Al-Ahmari, A., Wu, N., & Qu, T. (2017). Deadlock recovery for flexible manufacturing systems modeled with Petri nets. Information Sciences, 381, 290-303.

146.        Umer, U., Mohammed, M. K., Qudeiri, J. A., & Al-Ahmari, A. (2016). Assessment of finite element and smoothed particles hydrodynamics methods for modeling serrated chip formation in hardened steel. Advances in Mechanical Engineering, 8(6).

147.        Ye, S., Liu, C., Li, Z., & Al-Ahmari, A. (2017). Iterative optimization for frame-by-frame object pose tracking. Journal of Visual Communication and Image Representation, 44, 72-81.

148.        Umer, U., Mohammed, M. K., & Al-Ahmari, A. (2017). Multi-response optimization of machining parameters in micro milling of alumina ceramics using Nd:YAG laser. Measurement, 95, 181-192.

149.        Balla, V. K., Das, M., Mohammad, A., & Al-Ahmari, A. M. (2016). Additive Manufacturing of γ-TiAl: Processing, Microstructure, and Properties Advanced Engineering Materials, 18(7), 1208-1215

150.        Qudeiri, J. E. A., Umer, U., Abidi, M. H., Al-Ahmari, A. M., & Abu Khadra, F. (2016). On multistage approach for flexible routing in flexible manufacturing systems. Advances in Mechanical Engineering, 8(7).

151.        Al-Ahmari, A. M. A., Rasheed, M. S., Mohammed, M. K., & Saleh, T. (2016). A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel–Titanium-Based Shape Memory Alloy. Materials and Manufacturing Processes, 31(4), 447-455.

152.        Alahmari, A. M., Ahmed, N., & Darwish, S. (2016). Laser beam micro-machining under water immersion. The International Journal of Advanced Manufacturing Technology, 83(9-12), 1671-1681.

153.        Adham Ezzat Ragab, Mohamed Adel Taha, Adel Taha Abbas, Essam Ali Al-Bahkali, Eham Adel El-Danaf, 2017,  “Effect of Extrusion Temperature on the Surface Roughness of Solid State Recycled Aluminum Alloy 6061 Chips during Turning Operation”, Advances in Mechanical Engineering (IF 0.827), Accepted for publication.

154.        Abbas, Adel T., Mohanad Alata, Adham E. Ragab, Magdy M. El Rayes, and Ehab A. El Danaf, 2017, "Prediction Model of Cutting Parameters for Turning High Strength Steel Grade-H: Comparative Study of Regression Model versus ANFIS", Advances in Materials Science and Engineering (IF 1.299).

155.        Alharthi, Nabeel H., Sedat Bingol, Adel T. Abbas, Adham E. Ragab, Ehab A. El-Danaf, and Hamad F. Alharbi, 2017, "Optimizing Cutting Conditions and Prediction of Surface Roughness in Face Milling of AZ61 Using Regression Analysis and Artificial Neural Network." Advances in Materials Science and Engineering (IF 1.299).

156.        Al-Obaisi, A. M., E. A. El-Danaf, A. E. Ragab, M. S. Soliman, and A. N. Alhazaa., 2017, "Statistical Model for the Mechanical Properties of Al-Cu-Mg-Ag Alloys at High Temperatures." Advances in Materials Science and Engineering (IF 1.299).

157.        Abbas, Adel Taha, Mohamed Adel Taha, Adham Ezzat Ragab, Ehab Adel El-Danaf, and Mohamed Ibrahim Abd El Aal, 2017, "Effect of Equal Channel Angular Pressing on the Surface Roughness of Solid State Recycled Aluminum Alloy 6061 Chips." Advances in Materials Science and Engineering (IF 1.299).

158.        Mohamed Aly Louly, Anis Gharbi, Mohamed Naceur Azaiez, Abdelghani Bouras, Ayman Mostafa, Abdelaty Sayed, 2017, A Staffing Tool to Improve Efficiency at a Nursing Department, International Journal of Engineering Research and Application, doi: 10.9790/9622-0701019196

159.        M. A. Louly, O. M. Lemine, A. Gharbi ,2017, "Modeling of the microstructural properties of (x)ZnO(1 − x)Fe2O3 nanocrystallines by artificial neural network and response surface methodology", Measurement, Vol 95, pp. 70-76.

160.        Lotfi Hidri, Anis Gharbi (2017), "New Efficient Lower Bound for the Hybrid Flow Shop Scheduling Problem With Multiprocessor Tasks", IEEE Access, doi: 10.1109/ACCESS.2017.2696118.

161.        Mehdi Mrad, Sabrine Chalghoumi, Talel Ladhari, Anis Gharbi, (2017), "Enhanced Lower Bounds and Exact Procedures for Total Completion Time Minimization in a Two-Machine Permutation Flowshop with Release Dates", International Transactions in Operational Research, DOI: 10.1111/itor.12421

162.        Al-Ahmari, A., Ateekh Ur Rehman and Shawkat Ali, (2016) ‘Decision support system for the selection of advanced manufacturing technologies’. Journal of Engg. Research Vol. 4 No. (4) December 2016 pp. 130-150. (ISI impact factor 0.212)

163.        A U Rehman (2016), ‘An approach to evaluate wind power plant location alternatives’, South African Journal of Industrial Engineering December 2016 Vol 27(4), pp 153-165. (ISI impact factor 0.514)

164.        Ateekh-Ur-Rehman and Mohammed Alkahtani (2017), ‘Automobile Tire Assessment: A Multi-Criteria Approach’, Engineering, Technology & Applied Science Research Vol. 7, No. 1, pp. 1363-1368.

165.        Ateekh Ur Rehman (2017), ‘Multi Criteria Grey Relational Approach to Evaluate Reconfigurable Manufacturing Configurations’, South African Journal of Industrial Engineering, 2017 Vol 28(1), pp 36-46. (ISI Impact factor: (0.514)

166.        MH Abidi, AM Al-Ahmari, AM El-Tamimi, S Darwish, A Ahmad. (2016). ‘Development and evaluation of the virtual prototype of the first Saudi Arabian-designed car’. Computers, 5(4), pp. 26.

167.        X Chen, Z Li, N Wu, A Al‐Ahmari, AM El‐Tamimi, EA Nasr. (2016). ‘Confusion diagnosis and avoidance of discrete event systems using supervisory control’. IEEJ Transactions on Electrical and Electronic Engineering, 11 (1), pp. 49-62.

168.        Bashir Salah, Omar Janeh, Bernd Noche, Tobias Bruckmann, Saber Darmoul, 2017, Design and Simulation Based Validation of the Control Architecture of a Stacker Crane Based on an Innovative Wire-Driven Robot, Robotics and Computer Integrated Manufacturing, Volume 44, Pages 117-128

169.        Impact factor 2.183

170.        Khalid Alnowibet, Nabil Alrajeh, Abdelghani Bouras, and Luigi Guiso , “Optimal Academic Department Faculty Staffing to Meet Quality and Accreditation Standards in Saudi Arabia”, J. Comput. Theor. Nanosci.  Volume 14, Number 4, April 2017, pp. 1948-1964(17) Impact Factor =1.666

171.        Abdelghani Bouras "Using goal linear programming to manage natural gas take-or-pay contract clauses in electricity generation", Journal of Natural Gas Science and Engineering, Volume 35, Part A, September 2016, Pages 1228–1238. Impact Factor =2.718

172.        Mohammed Al Kindi, Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S Abouel Nasr, Sundar Ramalingam and Mohammed Badwelan, "Functional and aesthetic outcomes of electron beam-melted titanium reconstruction plates: an in vivo goat study", Biomedical Research,  Vol. 28, Issue 5, pp. 2073-2080, 2017.

173.        Husam Kaid; Mohammed A. Noman; Emad Abouel Nasr; Mohammed Alkahtani, "Six Sigma DMAIC phases application in Y company: a case study", International Journal of Collaborative Enterprise, Vol. 5 No. 3/4, pp. 181-197, 2016.

174.        Khaja Moiduddin, Abdulrahman Al-Ahmari, Mohammed Al Kindi, Emad S. Abouel Nasr, Mohammed Ashfaq, Sundar Ramalingam, "Customized porous implants by additive manufacturing for zygomatic reconstruction"; Biocybernetics and Biomedical Engineering, Volume 36, Issue 4, pp. 719-730, 2016.

175.        Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S. Abouel Nasr, Mohammed Al Kindi, "Evaluation of Titanium Implants fabricated using Electron beam melting and traditional Casting technique", Biomedical Research, Special Issue, pp. S68-S74, 2016.

176.        Imane Outmal, Ali Kamrani, Emad S. Abouel Nasr and, Mohammed Alkahtani, "Modeling and Performance Analysis of A Closed-Loop Supply Chain Using First-Order Hybrid Petri Nets", Advances in Mechanical Engineering, Vol. 8(5) 1–15, 2016.

177.        Hussein Mohamed A Hussein, Shailendra Kumar, Emad S Abouel Nasr, "Computer-Aided Design and Simulation of Strip Layout for Progressive Die Planning Using Petri Nets", Advances in Mechanical Engineering, Vol. 8, N0. 4, pp. 1–9, 2016

178.        Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S. Abouel Nasr,                Mohammed Al Kindi,  Sundar Ramalingam, Ali Kamrani, "Comparing 3-Dimensional Virtual Reconstruction methods in Customized Implants", International Journal Of Advanced Biotechnology and Research (IJBR), Vol. 7, Issue 1,  pp. 323-331, 2016.

179.        Xiaoliang Chen, Zhiwu Li and Naiqi Wu, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, and Emad S. Abouel Nasr, “Confusion avoidance for discrete event systems by P/E constraints and supervisory control”, IMA Journal of Mathematical Control and Information; Volume 33, Issue 2, pp. 309-332, 2016.

180.        Al-Ahmari, Abdulrahmana, Moiduddin, Khajaa, Nasr, Emad S. Abouel, Mian, Syed Hammada, Al Kindi, Mohammede, "A Comparison Study On The Design Of Mirror And Anatomy Reconstruction Technique In Maxillofacial Region", Technology and Health Care Journal, vol. 24, no. 3, pp. 377-389,  2016.

181.        Ali Balma and Mehdi Mrad, 2017 “ Allocating nodes to hubs for minimizing the hubs processing resources: A case study”, Rairo Operations Research ,DOI: 10.1051/ro/2017065, (ISI) (Impact Factor 0.6 Q4)

182.        Mehdi Mrad, Ali Balma, Fatma Moalla, and Talel Ladhari (2017), “Nodes Migration Scheduling of Access Networks” IEEE Transactions on Network and Service Management. (DOI: 10.1109/TNSM.2016.2628894) (ISI) (Impact Factor 3.3  Q1)

183.        Mehdi Mrad, Sabrine Chalghoumi, Talel Ladhari, Anis Gharbi (2017), “Enhanced Procedures for Minimizing the Total Completion Time in a Two-Machine Permutation Flowshop with Release Dates”, International Transactions In Operational Research, DOI: 10.1111/itor.12421. (ISI) (Impact Factor  1.73  Q2)

184.        Mrad, Mehdi; Alfares, Hesham K. (2016) “OPTIMUM MULTI-PERIOD, MULTI-PLANT, AND MULTI-SUPPLIER PRODUCTION PLANNING FOR MULTI-GRADE PETROCHEMICALS”, International Journal of Industrial Engineering: Theory, Applications and Practice,  Vol. 23 Issue 6, 399-411. (ISI) ) Impact Factor 0.42  Q4)

185.        Ramadan, M.Z., & Soliman, A.T." Design of Rapid Serial Visual Presentation Panel for Arabic Readers" Intnernational Journal of Engineering Research and Application, Vol. 6, Issue 11, (Part -3) November 2016, pp.39-44.

186.        Ramadan, M.Z., & Soliman, A.T."User perceived exertion, work posture and muscle activity while doing engineering drawing using adjustable and fixed table's heights" IOSR Journal Of Humanities And Social Science, Volume 21, Issue12, Ver. 3 (December. 2016) pp. 7-12.

187.        Ramadan, M.Z., Ahmed, Ayman M., & AbdElgawad, AbdElatty E." Effect of Organized and Self-Managed Breaks on Performance, Physiological, and Subjective Measures in Data Entry, Vigilance, and Cognitive Tasks," American Journal of Engineering Research (AJER), 2017, 6 (1), pp-21-27.

188.        Khalaf, T.M., Ramadan, M.Z., & Al-Ashaikh, R.A. "How many days are required for workers to acclimatize to heat?" Work: A Journal of Prevention, Assessment, & Rehabilitation, 2017, Vol 56, No. 2, pp. 285-289. Impact Factor =0.779

189.        Ramadan, M.Z., AlKahtani, M.S., "Development of a device to reduce the risk of injury in handling unstable loads." Work: A Journal of Prevention, Assessment, & Rehabilitation, 2017, Vol 59, No.4, pp1-12. Impact Factor =1.526

190.        Hatem, M. and Ramadan, M.Z. "Using electromyography responses to investigate the effects of the display type, viewing distance, and viewing time on visual fatigue." Displays, 2017, Vol. 59, pp. 51-58. Impact Factor =0.779

191.        K. Moiduddin, S. Anwar, N. Ahmed, M. Ashfaq, A. Al-Ahmari, 2017, Computer   Assisted   Design   and   Analysis   of   Customized   Porous   Plate   for Mandibular   Reconstruction, IRBM, Vol 38, pp 78-89 (Impact factor: 0.77)

192.        Shafiq Ahmad, Shahid Bashir. (2017), “A pilot study investigating the association between sleep and cognitive function among adolescents”. Asian Journal of Psychiatry, Vol. 28, pp. 34-37. ISSN: 1876-2018

193.        S. Bashir, W. Kyoung Yoo, S. Ahmad, M. Alatefi, A. Abu Juma (2017) “ Inter-individual variability in motor Cortex excitability assessment induced by Transcranial direct current stimulation in humans”, International Journal of Brain Stimulation. ISSN: 1935-861X:  IF: 6.078 (2016), Rank: Q1

194.        M. A. K. Chowdhury, A.M.M. Sharif Ullah, S. Anwar,          2017, Drilling High Precision Holes in Ti6Al4V Using Rotary Ultrasonic Machining and Uncertainties Underlying Cutting Force, Tool Wear, and Production Inaccuracies, Materials, Vol. 10, 1069. (ISI, Impact Factor: 2.65) [Publisher: MDPI, Switzerland] [Doi:10.3390/ma10091069]

195.        A.M.M. Sharif Ullah, T. Akamatsu, M. Furuno, M. A. K. Chowdhury and A. Kubo, 2016, Strategies for developing milling tools from the viewpoint of sustainable manufacturing, International Journal of Automation Technology, Vol. 10(5), pp 727-736. [Publisher: Fuji Technology Press, Japan] [DOI: 10.20965/ijat.2016.p0727]

196.        A.M.M.S. Ullah, M. A. K. Chowdhury, and A. Kubo, 2017, A Surface Generation Mechanism of Grinding, Applied Mechanics and Materials, Vol. 860, pp13-18.  [Publisher: Trans Tech, Switzerland] [DOI:10.4028/www.scientific.net/AMM.860.13]

197.        Louati, A., Elkosantini, S., Darmoul, S., Ben Said, L., An Artificial Immune Network Based Multi-Agent System to Control Interrupted Flow at Signalized Intersections. Transportation Research Part C, Volume 82, September 2017, Pages 290-313 (ISI, Impact Factor: 3.8).

198.        Ferjani, H. Pierreval, A. Ammar, S. Elkosantini, A simulation-Optimization Based Heuristic to Assign Online Workers Affected by Fatigue in Manufacturing Systems, Computers & Industrial Engineering journal, Volume 112, October 2017, Pages 663-674 (ISI, Impact Factor: 2.623).

199.        Ben Ayed M., S. Elkosantini, An accelerated architecture based on GPU and Multi-Processor design for fingerprint recognition, International Journal of Advanced Computer Science and Applications, Volume 7 Issue 3, 2016.

200.        Alkahtani, M.; Ahmad, A.; Darmoul, S.; Samman, S.; Al-zabidi, A.; Ba Matraf, K. (2016) Multitasking Trends and Impact on Education: A: Literature Review, World Academy of Science, Engineering and Technology, International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering Vol:10, No:3, 2016

201.        Fayiz Abu Khadra, Jaber Abu Qudeiri, Mohammed Alkahtani, “Optimization of the Parameters of RISE Feedback Controller Using Genetic Algorithm”, Hindawi Publishing Corporation, Mathematical Problems in Engineering, Volume 2016, Article ID 3863147, 9 pages, http://dx.doi.org/10.1155/2016/3863147

 

Past Conference Publications

1. Abdulaziz M El-Tamimi, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Zhiwu Li, Husam Kaid, “Evaluation of Deadlock Control Designs in Automated Manufacturing Systems”, Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.

2. Basem M.A. Abdo, S.M.Darwish, A.M. EL-Tamimi, “Experimental Investigation of Cutting Forces in Ti-6Al-4V Alloys Using Rotary Ultrasonic Machining”. International Conference on Aeronautical, Robotics and Manufacturing Engineering (ARME'2015) June 15-16, 2015 Bangkok (Thailand)

3. Husam Kaid, Abdulaziz M. El-Tamimi, Emad Abouel Nasr and, Abdulrahman Al-Ahmari, "Applications of Petri nets Based Models in manufacturing Systems: A Review", the 2015 IEOM International Conference on Operations Excellence and Service Engineering, Orlando, Florida, USA, September 10 – 11, 2015.

4. Aziz T., A.-A. A., Darwish S., Al khawashki H., and Al Badr F. (2015). Finite Element Analysis of Finger Joint Implant: A Review Proceedings of the 2015 International Conference on Industrial Engineering and Operations ManagementDubai, United Arab Emirates (UAE), March 3 – 5, 2015.

5. Abdulrahman Al-Ahmari, Emad Abouel Nasr, Ali Kamrani, Mohammed Alkindi, and Khaja Moiduddin (2015) "Patient Specific Mandibular Implant for Maxillofacial Surgery using Addive Manufacturing " Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management Dubai, UAE, March 3 – 5.

6. Abdulaziz M El-Tamimi, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Zhiwu Li, and Husam Kaid (2015) "Evaluation of Deadlock Control Designs in Automated Manufacturing Systems" Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management Dubai, UAE, March 3 – 5.

7. Darmoul S., Abidi M.H., Ahmad A., Al-Ahmari A.M., Darwish S.M., & Hussein H.M.A. (2015). Virtual Reality for Manufacturing: A Robotic Cell Case Study. In Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management (IEOM’2015), Dubai, UAE, March 03 – 05, 2015.

8. Ahmad A., Darmoul S., Wadea A., Abidi M.H., & Al-Ahmari A.M. (2015). Rapid Prototyping for Assembly Training and Validation. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing (INCOM 2015), Ottawa, Canada, May 11 – 13, 2015.

9. Al-Ahmari A.M., Ahmad A., Aslam M.U., Abidi M.H., & Darmoul S., (2015). Virtual Assembly of an Airplane Turbine Engine. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing (INCOM 2015), Ottawa, Canada, May 11 – 13, 2015.

10. Workshop of excellence centers, 17 February, University of Tabuk, Saudi Arabia.

11. Workshop of building technical capabilities in the field of new technologies in Arabica Countries, 2014 /12 /16- 15. Amman, Jordan.

12. Bashir Salah, Omar Janeh, Tobias Bruckmann, Bernd Noche, 2015, Improving the Performance of a New Storage and Retrieval Machine Based on a Parallel Manipulator Using FMEA Analysis, INCOM, May 2015

13. A. Bouras, and L. Tadj, “Production planning in a closed-loop supply chain with deteriorating items”, The Western Business & Management Association International Research Conference for the Management Disciplines, San Francisco, California, April 10-11, 2015

14. A. Bouras, and N. Cherfi, “A new optimization model for techno-economic studies in the case of hybrid energy”, Modeling and Optimization: Theory and Applications Conference, MOPTA 2015, Bethlehem, USA, 20-22 July, 2015.

15. Krid, M; Fauroux, JC ; Bouzgarrou, BC, 2014, Modular Cooperative Mobile Robots for Ventral Long Payload Transport and Obstacle Crossing, 5th European Conference on Mechanism Science (EUCOMES), Univ Minho, Guimaraes, PORTUGAL, SEP 16-20,

16. Anis Gharbi, 2015, “Goal Programming Models for Physician Scheduling at a Large Eye Specialist Hospital”, IIBA Conference, Fort Lauderdale, USA, April 2015

17. Anis Gharbi, 2014, Mohamed Haouari, Mohamed Labidi, “Single Machine Scheduling under Availability Constraints”, INFORMS Annual Meeting 2014, San Francisco, USA, November 2014

18. Mohamed Labidi, Mehdi Mrad (2015), “A MIP Model based on Graph Theory for the Physician Scheduling Problem”, International Conference on Healthcare, Applied Science and Technology, Las Vegas, USA.

19. Mohamed Labidi, Anis Gharbi, Mohamed Haouari (2014), “Single Machine Scheduling under availability constraints”, INFORMS Annual Meeting, San Francisco, California, USA.

20. Mnif, S., Galoui, S., Elkosantini, S., Darmoul, S., Ben Said, L., (2015). Ontology-based performance evaluation of public transport systems. In Proceedings of the Fourth IEEE International Conference on Advanced Logistics and Transport, ICALT’2015, Valenciennes, France, May 20 – 22, 2015.

21. Ghariani, N., Elkosantini, S., Darmoul, S., Ben Said L., (2015). An Ontology Based Benchmarking Platform for the Assessment of Public Transportation Control Systems. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing, INCOM’2015, Ottawa, Canada, May 11 – 13, 2015.

22. Ahmad, A., Darmoul, S., Ameen, W., Abidi, M. H., Al-Ahmari, A. M., (2015). Rapid Prototyping for Assembly Training and Validation. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing, INCOM’2015, Ottawa, Canada, May 11 – 13, 2015.

23. Abidi, M. H., Ahmad, A., Darmoul, S., Al-Ahmari, A. M., (2015). Haptics Assisted Virtual Assembly. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing, INCOM’2015, Ottawa, Canada, May 11 – 13, 2015.

24. Ahmad, A., Al-Ahmari, A. M., Aslam, M. U., Abidi, M. H., Darmoul, S., (2015). Virtual Assembly of an Airplane Turbine Engine. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing, INCOM’2015, Ottawa, Canada, May 11 – 13, 2015.

25. Darmoul, S., Abidi, M. H., Ahmad, A., Al-Ahmari, A. M., (2015). Virtual reality for manufacturing: A robotic cell case study. In Proceedings of the Fifth International Conference on Industrial Engineering and Operations Management, IEOM’2015, Dubai, United Arab Emirates, March 03 – 05, 2015.

26. Darmoul, S., Ahmad, A., Ghaleb, M., Alkahtani, M., (2015). Interruption Management in Human Multitasking Environments. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing, INCOM’2015, Ottawa, Canada, May 11 – 13, 2015.

27. Alkahtani, M., Aziz, T., Ahmad, A., Darmoul, S., (2015). Multitasking in Healthcare Systems. In Proceedings of the 2015 Industrial and Systems Engineering Research Conference, ISERC’2015, S. Cetinkaya and J. K. Ryan, eds., May 30 – June 02, 2015, Tenessee, USA.

28. Ben Cheikh, S., Gabouj, S.-H., Darmoul, S., (2015). Reconfiguring manufacturing systems using an analytic hierarchy process with strategic and operational indicators. In Proceedings of the Fifth International Conference on Industrial Engineering and Operations Management, IEOM’2015, Dubai, United Arab Emirates, March 03 – 05, 2015.

29. Ateekh Ur Rehman, 2015, Application of Six Sigma in Service Contracting Company, Proceedings of the 2015 International Conference on Operations Excellence and Service Engineering, Orlando, Florida, USA, September 10-11, 2015

30. Abdulaziz M El-Tamimi, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Zhiwu Li, Husam Kaid, “Evaluation of Deadlock Control Designs in Automated Manufacturing Systems”, Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.

31. Abdulrahman Al –Ahmari, Emad Abouel Nasr, Ali Kamrani, Mohammed Alkindi, Khaja Moiduddin, "Patient Specific Mandibular Implant for Maxillofacial Surgery using Addive Manufacturing", Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.

32. Ali Kamrani, Maryam Azimi, Emad Abouel Nasr, "Predictive Modeling of Tumors using RP", Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.

33. Husam Kaid, Abdulaziz M. El-Tamimi, Emad Abouel Nasr and, Abdulrahman Al-Ahmari, "Applications of Petri nets Based Models in manufacturing Systems: A Review", the 2015 IEOM International Conference on Operations Excellence and Service Engineering, Orlando, Florida, USA, September 10 – 11, 2015.

34. Lotfi Hidri, Belgacem Ben Youssef, Achraf Gazdar (2015), Lower bounds for the parallel processing scheduling problem with multiprocessor tasks release date and delivery time, Multidisciplinary International Scheduling Conference: MISTA , Prague, Czech Republic , 25-28 Aug 2015.

35. Lotfi Hidri, Achraf Gazdar (2015), Bounding schemes for the parallel processors scheduling problem with release date delivery time and with no-idle time constraint, Multidisciplinary International Scheduling Conference: MISTA , Prague, Czech Republic , 25-28 Aug 2015.

36. Naveed A, Darwish S. and Alahmari A.” Laser Beam Hybrid Processes: A Review Paper” Int Conference ACEX2015, Munchen, July 2015.

37. T Aziz, Darwish S M, F AlBader, Alahmari, H AlKawashki, “A FINITE ELEMENT ANALYSIS OF FINGER JOINT IMPLANT: A REVIEW”, Proceedings of the Int. Conference on Industrial Engineering and Operations Management, Dubai, 2015.

38. S. W. Ameen, S M Darwish, A. AlSamhan, M “Towards Enhancing Peel Strength of Adhesively Bonded Joints”, PCM2015, IOP Conference Series: Materials Science and Engineering, China 2015.

39. Darwish, I, Sharaf, A. Alahmari, M Alkahtani, Optimizing 3D Laser Scanning of an Automobile Body Using 5-axis CNC, IEMS, USA, 2015.

40. Darmoul, S., Ahmad, A., Ghaleb, M., Alkahtani, M., (2015). Interruption Management in Human Multitasking Environments. In Proceedings of the 2015 IFAC Symposium on Information Control in Manufacturing, INCOM’2015, Ottawa, Canada, May 11 – 13, 2015

41. A. Alkahtani, M., Aziz, T., Ahmad, A., Darmoul, S., (2015). Multitasking in Healthcare Systems. In Proceedings of the 2015 Industrial and Systems Engineering Research Conference, ISERC’2015, S. Cetinkaya and J. K. Ryan, eds., May 30 – June 02, 2015, Tennessee, USA.

42. A. Darwish, S., Sharaf, M., Al-Ahmari, A., Alkahtani, M. (2015), “Optimizing 3D Laser Scanning of an Automobile Body Using 5-axis CNC”, IEMS, USA.

43. Ammar, A., Pierreval, H. and Elkosantini, S, A multiobjective simulation optimization approach to define teams of workers in stochastic production systems, International conference on Industrial engineering and systems management, Spain, 2015.

44. Rekik, S. Elkosantini and H. Chabchoub, Container stacking problem: a survey, The 45th International Conference on Computers & Industrial Engineering CIE45, France 2015

46. N. Gheriani, S. Elkosantini, S. Darmoul, L. Ben Said, An Ontology Based Benchmarking Platform for the Assessment of Public Transportation Control Systems, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), Canada, 2015

47. Rekik, S. Elkosantini, H. Chabchoub, Real-Time Stacking System for dangerous containers in seaport terminals, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), Canada, 2015

48. Ammar, A., Pierreval, H. and Elkosantini, S., Une Approche d’Affectation Dynamique des Opérateurs dans un Contexte de Demande Stochastique et Changeante, Basée Sur TOPSIS et l’Optimisation Via Simulation, proc. 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, MOSIM 14, 5 au 7 novembre 2014 - Nancy –France, (In French)

49. Mohamed A. E. Saleh, Adham E. Ragab and Ayman M. Mostafa, “The Deformation Behavior of an Automotive Floor Panel During Sheet Hydroforming onto Male/ Female Die Halves”, International Conference on Industry, Engineering and Management Systems, Florida, 2014.

50. Mohamed Sharaf, Designing a new School Furniture Suitable for Saudi Students, International Conference on Industrial Engineering and Systems Management, Barcelona, Spain, February 27-28, 2013. pages 41-48

51. A. Bouras, A. Al Sayyud, “ Short-Term Load Forecast at Saudi Electricity Company Central Operating Area (COA) using ANFIS”, The twentieth International Conference on Industry, Engineering, and Management Systems (IEMS 2014), 24-26 March 2014, Cocoa Beach, Florida, USA.

52. A. Derhab, A. Bouras, F. Bin Muhaya, M. Khurram Khan, and Y. Xiang, “Spam Trapping System: Novel Security Framework to Fight against Spam Botnets”, accepted paper, International Conference on Telecommunications 2014, Telecommunications: Cooperation for a United World, 5-7 May 2014, Lisbon, Portugal

53. A. Gharbi, M. Louly, M. N. Azaiez, and A. Bouras, "Goal-Programming Models for Nurse Scheduling at Two Critical Intensive Care Units", Proceedings, WSCAR’ 2014, World Symposium on Computer Applications & Research, 18-20 January 2014, Sousse, Tunisia.

54. Abdelghani Bouras, “A Two Stage Method for the Variable Bin Packing Problem with Conflicts: An Application for Batch Annealing in Steel Industry”, The twentieth International Conference on Industry, Engineering, and Management Systems (IEMS 2014), 24-26 March 2014, Cocoa Beach, Florida, USA.

55. Abdulrahman AI-Ahmari, Emad Abouel Nasr, Awais A. Khan, Ali Kamrani, "Intelligent fixture planning system for prismatic parts", International Conference on Sustainable Intelligent Manufacturing (SIM 2013), Lisbon, Portugal, 26-29 June, 2103.

56. Abidi M.H., El-Tamimi A.M., Darwish S.M., Al-Ahmari A.M. & Ahmad A. (2013). ‘Evaluation of a Virtual Prototype of the First Saudi Arabian Car’. International Conference on Industry, Engineering, and Management Systems (IEMS 2013), 25-27 March, 2013, Cocoa Beach, FL, USA.

57. Afify, A.A. A fuzzy on-line discretisation method for rule induction classifiers. In: Proceedings of the 2013 Industrial and Systems Engineering Research Conference (ISERC-13), Puerto Rico, 2013.

58. Afify, A.A. FuzzyRULES-II: A new approach to fuzzy rule induction from numerical data. Submitted to the IEEE International Conference on Data Mining (ICDM), 2014.

59. Afify, A.A. FuzzySRI-II: A fuzzy rule induction algorithm for numerical output prediction. In: Proceedings of the 2014 International Conference on Data Mining and Knowledge Engineering (ICDMKE-14), University College London, UK, pp. 197-202, 2014 (Eds Proceedings of the World Congress on Engineering, Vol I, ISBN: 978-988-19252-7-5, ISSN: 2078-0958 (Print); ISSN: 2078-0966 Online

60. Ahmad A., Abidi M.H. & Al-Ahmari A.M. (2013). ‘Virtual Prototyping for CMM Fixture Design’. International Conference on Industry, Engineering, and Management Systems (IEMS 2013), 25-27 March, 2013, Cocoa Beach, FL, USA.

61. Al-Kahtani, M., Safitra, M., Ahmad, A., Al-Ahmari, A. M. (2014), “Cost-Benefit Analysis of Flexible Manufacturing System (FMS)”, Proceeding of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, January 7-9, 2014

62. Anis Gharbi, Mohamed Labidi (2014), “New Approaches for Flow Shop Scheduling”, The Global Business, Marketing, Finance & Economics Research Conference, Los Angeles, USA.

63. Anis Gharbi, Mohamed Labidi, Mohamed Haouari (2014), “Single Machine Scheduling under availability constraints”, INFORMS Annual Meeting, San Francisco, California, USA.

64. Ateekh-Ur-Rehman , Abdulaziz Eltamimi, and Yusuf Siraj Usmani (2013) “Multi-Criteria Approach For a Wind Power Plant Site Decision”, International Conference on Sustainable Green Development Dubai Advanced Green Agenda (SB 2013), Dubai, 8 – 10 Dec 2013.

65. Awais A. Khan, Emad Abouel Nasr, Abdulrahman AlAhmari, Osama Abdulhameed, Mustufa H. Abidi, "An Integrated CAPP/CAFD/CAIP System for Prismatic Parts", IIE Annual Conference, Montréal, Canada, 2014

66. Bayar, N., Darmoul, S., Gabouj, S.-H., Pierreval, H., (2014). An immune based ontology implementation of hazard and operability analysis in manufacturing systems. 5th International Conference on Mechanical, Industrial and Manufacturing Technologies, MIMT 2014, Penang, Malaysia, March 10 – 11, 2014.

67. E. Abouel Nasr, K. Gad El Mola and A. El-Tamimi, “An Effective Green Supply Chain At Energy Production”, CIE43 Proceedings, 16-18 October, The University of Hong Kong, 2013.

68. E. S. Abouel Nasr, A. A. Khan, A. M. Alahmari, H. M. A. Hussein, "A Feature Recognition System using Geometric Reasoning", International Conference on Manufacture of Lightweight Components – ManuLight 2014, 4th April, Dortmund, Germany, Procedia CIRP 18, pp. 238 – 2 43, 2014.

69. El-Sherbeeny, AM. (2014). “Highlighting the Need for Engineering Education for Females in Saudi Arabia,” 121st ASEE (American Society for Engineering Education) Annual Conference & Exposition, Indianapolis, Indiana, USA, June 15-18, 2014. (ISI Conference)

70. El-Sherbeeny, AM. (2014). “The Partial Cartoon Central Vision Compensation Technique: Introduction and Evaluation,” 4th International Conference on Multimedia Computing and Systems (ICMCS’14), Marrakesh, Morocco, April 14-16, 2014. (ISI Conference)

71. Emad Abouel Nasr, Abdulrahman AI-Ahmari, Osama Abdulhameed, Syed Hammad Mian, "Set up planning for automatic generation of inspection plan", International Conference on Sustainable Intelligent Manufacturing (SIM 2013), Lisbon, Portugal, 26-29 June, 2013.

72. Emad Abouel Nasr, Abdulrahman Al-Ahmari, Hazem Alkhawashki, Abdulsalam Altamimi, Mohammed Alkhuraisi, Karem Ismai, " A Prospective Finite Element Analysis of Proximal Interphalangeal Joint", IIE Annual Conference, Montréal, Canada, 2014

73. Emad S. Abouel Nasr, Mustufa H. Abidi, Abdulaziz M. El-Tamimi, Abdulrahman M. Al-Ahmari, “Virtual Assembly in a Semi-Immersive Environment”, International Conference on Industrial Engineering and Systems Management (ICIESM 2013), Barcelona, Spain, February 2013.

74. Gharbi A., Louly M.A., M. N. Azaiez, and A. Bouras, "Goal-Programming Models for Nurse Scheduling at Two Critical Intensive Care Units", Proceedings, WSCAR’ 2014, World Symposium on Computer Applications & Research, 18-20 January 2014, Sousse, Tunisia.

75. Ghariani, N., Elkosantini, S., Darmoul, S., Ben Said, L., (2014). A survey of simulation platforms for the assessment of public transport control systems. 3rd International Conference on Advanced Logistics and Transport, ICALT 2014, Hammamet, Tunisia, May 01 – 03, 2014.

76. Ghassan Kbar & Shady Aly; “SMART Workplace for Persons with Disabilities (SMARTDISABLE); 4th International Conference on Multimedia Computing and Systems (ICMCS'14), April 2014, (Published in IEEE Explore).

77. H.M.A. Hussein, Emad Abauel Nasr, Awis Khan, "Automated feature extraction from cylindrical parts based on STEP", International Conference on Sustainable Intelligent Manufacturing (SIM 2013), Lisbon, Portugal, 26-29 June, 2103.

78. January 2014, Anis Gharbi, Mohamed Aly Louly, Mohamed Naceur Azaiez, Abdelghani Bouras, " Goal-Programming Models for Nurse Scheduling at Two Critical Intensive Care Units", World Symposium on Computer Applications and Research, Sousse, Tunisia.

79. Anis Gharbi, Mohamed Labidi, "New Approaches for Flow Shop Scheduling", The Global Business, Marketing, Finance & Economics Research Conference, Los Angeles, USA, June 2014,

80. K. Gad El Mola, E. Abouel Nasr and A. El-Tamimi, “Spare Parts Management By Using Analytic Hierarchy Process”, CIE43 Proceedings, 16-18 October, The University of Hong Kong, 2013

81. M Louly M.A., A. Gharbi, M. N. Azaiez, and A. Bouras, “A Nurse Staffing Analysis at the Largest Hospital in the Gulf Region”, Conference paper, The 3rd International Conference On Quantitative Sciences and Its Applications (ICOQSIA 2014). 12-14 August 2014, Langkawi, Malaysia.

82. March 2014, "Improving the Academic Environment through Computerized Optimization Tools: A Success Story at the Largest Gulf University", IBEA2014, Hong Kong, paper ID: 069MIX.

83. Moalla, D., Elkosantini, S., Darmoul S., (2013). An artificial immune network to control road traffic at a single intersection. 5th International Conference on Industrial Engineering and Systems Management, IESM 2013, Rabat, Morocco, October 28-30, 2013.

84. Mohamed A. E. Saleh, Adham E. Ragab and Ayman M. Mostafa, “The Deformation Behavior of an Automotive Floor Panel During Sheet Hydroforming onto Male/ Female Die Halves”, International Conference on Industry, Engineering and Management Systems, Florida, 2014.

85. Mohamed Labidi (2014), “A Shift Scheduling Model for a Bank IT Staff”, The fifth INFORMS Optimization Society Conference, Rice University in Houston, Texas, USA.

86. Mohammed Al-Kahtani, Muflih Safitra, Ali Ahmad and Abdulrahman Al-Ahmari (2014) “Cost-Benefit Analysis of Flexible Manufacturing Systems” ” Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 – 9, 2014

87. Muflih Safitra, Ali Ahmad and Abdulrahman Al-Ahmari (2014) “Experimental Design of a Flexible Manufacturing System” Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 – 9, 2014

88. Mustufa H. Abidi, Ibrahim Al Harkan, Abdulaziz M. El Tamimi, A.M. Al Ahmari, Emad S. Abouel Nasr, "Ant Colony Optimization for Job Shop Scheduling to Minimize the Total Weighted Tardiness", IIE Annual Conference, Montréal, Canada, 2014.

89. Nasr, E. A., AlAhmari, A.M., Khan, A. A., Kamrani, A., 2013, " An object oriented approach to CAPP-CAFP System for Prismatic Parts", Proceedings of the 2013 Industrial and Systems Engineering Research Conference, A. Krishnamurthy and W.K.V. Chan, eds., Puerto-Rico, USA

90. Safitra, M., Ahmad, A., Al-Ahmari, A. M., Al-Kahtani, M. (2014), “Experimental Design of a Flexible Manufacturing System”, Proceeding of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, January 7-9, 2014

91. Mohamed Sharaf, AN INTEGRATED APPROACH LEAN SIX SIGMA & RISK MANAGEMENT IN ENTERTAINMENT &MEDIA INDUSTRY, The International Symposium on Engineering and Natural Sciences (ISEANS), Beijing, China on 22-24 May, 2014,

92. Hidden Markov Modeling of Machines` Performance Deterioration, International Conference on Industry, Engineering, and Management System, Coca Beach, Florida 25-27 March 2013.

93. Anis Gharbi (2012), "Scheduling Maintenance Actions for Gas Turbines Aircraft Engines", ICOR-WASET2012, Phuket, Thailand, Vol. 72, pp. 13-15.

94. April 2013, Ichraf ZAIDI, Mehdi Mrad and Talel Ladhari " Genetic Local Search Algorithm for minimizing the total completion time in single machine scheduling problem with release dates and precedence constraints" The International Conference on Modeling, Simulation and Applied Optimization (ICMSAO’13) April 28-30, 2013, Hammamet, TUNISIA.

95. April 2013, Ines Meftahi and Mehdi Mrad" An Arc Flow Model for the two stages variable size cutting stock problem " The International Conference on Modeling, Simulation and Applied Optimization (ICMSAO’13) April 28-30, 2013, Hammamet, TUNISIA.

96. April 2013, Sabrien Chalghoumi , Mehdi Mrad and Talel Ladhari" A new lower bound for minimising the total completion time in two-machine flow shop under release dates " The International Conference on Modeling, Simulation and Applied Optimization (ICMSAO’13) April 28-30, 2013, Hammamet, TUNISIA.

97. Mohamed Labidi, Anis Gharbi (2013), " The non-permutation flow shop scheduling problem: Adjustment and bounding procedure”, Annual conference for industry, Engineering, and Management Systems. (AIEMS), Orlando, Florida.

98. Abdulrahman Al-Ahmari, Emad Abouel Nasr, Osama Abdulhameed , Automatic Execution of Inspection Plan for Prismatic Parts in Online Manufacturing, Proceedings of the 2013 Industrial and Systems Engineering Research Conference A. Krishnamurthy and W.K.V. Chan, eds.

99. Emad Abouel Nasr1, Abdulrahman Al-Ahmari2, Awais Khan, An object oriented approach to CAPP-CAFP System for Prismatic Parts, Proceedings of the 2013 Industrial and Systems Engineering Research Conference, A. Krishnamurthy and W.K.V. Chan, eds.

100. Emad S. Abouel Nasr, Mustufa H. Abidi, Abdulaziz M. El-Tamimi, Abdulrahman M. Al-Ahmari, “Virtual Assembly in a Semi-Immersive Environment”, International Conference on Industrial Engineering and Systems Management (ICIESM 2013), Barcelona, February 2013.

101. Emad Abouel Nasr, Khaled Gad Al Mola, and Abdulaziz Atamimi, “Quantifying the Effects of Green Supply Chain Requirements at Energy Production”, IIE Annual conference, Puerto Rico.

102. Emad Abouel Nasr, Khaled Gad Al Mola, and Abdulaziz Atamimi, “Spare Parts Management by Using Analytic Hierarchy Process”, IIE Annual conference, Puerto Rico, 2013.

103. Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Osama Abdulhameed, “Automatic Execution of Inspection Plan for Prismatic Parts in online Manufacturing Systems”, IIE Annual conference, Puerto Rico, 2013.

104. Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani , Awais Khan , “An Object Oriented Approach to CAPP-CAFP System for Prismatic Parts”, IIE Annual conference, Puerto Rico, 2013.

105. Lotfi Hidri, 2013, Heuristics for the parallel machine problem with availability constraints for the machines, 14th ROADEF International Conference of French Society for operational research and decision making, Troyes France, February 13-15, 2013.

106. Afify, A.A. A Fuzzy On-line Discretisation Method for Rule Induction Learners. IIE Annual Conference on Industrial and Systems Engineering Research (ISERC-2013), 2013 (the paper will be presented on 19 May 2013).

107. Darmoul, S., (2013). Artificial Immune Systems: Conferring Immunity to Production Organizations. 5th International Congress of Antibodies, Hangzhou, China, March 18th – 20th, 2013.

108. Elkosantini, S., Darmoul, S., (2013). Intelligent Public Transportation Systems: A Review of Architectures and Enabling Technologies. International Conference on Advanced Logistics and Transport (ICALT’2013), Sousse, Tunisia, May 29th – 31st, 2013.

109. Mohamed A. E. Saleh, and Adham E. Ragab, “Ti-6Al-4V Helical Spring Manufacturing via SLM: Effect of Geometry on Shear Modulus”, The 2013 IAENG International Conference on Industrial Engineering, Hong Kong.

110. Mohamed A. E. Saleh, and Adham E. Ragab, “Ti-6Al-4V Helical Spring Manufacturing via SLM: Effect of Geometry on Shear Modulus”, The 2013 IAENG International Conference on Industrial Engineering, Hong Kong.

111.        Anis Gharbi, 2017, A Goal Programming Approach for Physician Scheduling at an Emergency Department, International Conference on “Engineering & Technology, Computer , Basic & Applied Sciences”, ECBA, Bali, 6-7 September.

112.        Arif Ali Baig Moghal, Ateekh Ur Rehman and Bhaskar Chittoori (2017). Optimizing Fiber Parameters Coupled with Chemical Treatment: Promethee Approach. GEO-FRONTIERS 2017, to be held at Orlando, Florida, USA from 12 – 15 March 2017, pp 30 -41. http://ascelibrary.org/doi/abs/10.1061/9780784480472.004 

113.        Bashir Salah; Mohammed Alkahtani; Aiman Ziout, “Initial assessment on feasibility of remanufacturing practice: case of air conditioners” 9th International Conference on Science, Technology, Engineering and Management, Dubai, UAE, 2017.

114.        Bashir Salah; Mohammed Alkahtani; Aiman Ziout, “Using FMEA Analysis for Assessing Air Conditioners Remanufacturing Processes” Proceedings of the International Conference on Industrial Engineering and Operations Management, Rabat, Morocco, April 11-13, 2017

115.        Oday Abdulla, Josef Schlattmann; Maher Majeed; Bashir Salah,“ Analytical Simulation of Frictional Heat Generated in the Friction Clutches Using MATLAB GUI” 9th International conference on tribology, Turkey, September, 2017.

116.        Aiman Ziout; Ahmed Azab; N. Biswas; Bashir Salah; Mohammed Alkahtani, “Environmental performance of air conditioner remanufacturing” Second International Conference on Energy and Indoor Environment for Hot Climates, February 2017,  Doha, Qatar.

117.        Saqib Anwar, Mustafa M. Nasr, Mohammed Alkahtani and Abdulaziz Altamimi, 2017, Predicting surface roughness and exit chipping size in BK7 glass during rotary ultrasonic machining by adaptive neuro-fuzzy inference system (ANFIS), Proceedings of the International Conference on Industrial Engineering and Operations Management, Rabat, Morocco, April 11-13, 2017

118.        Saqib Anwar, Fawaz M. Abdullah, Bashir Salah, Shafiq Ahmad, Abdulrahman M. Al-Ahmari, 2017, An Overview of Electron Beam Melting research with Bibliometric Indicators, Proceedings of the International Conference on Industrial Engineering and Operations Management, Rabat, Morocco, April 11-13, 2017

119.        S. Mnif, S. Darmoul, S. Elkosantini, L. Ben Said, Integration of immune features into a Belief-Desire-Intention model for multi-agent control of public transportation systems, 12th International Conference on Hybrid Artificial Intelligent Systems (HAIS 2017), Spain, 2017

120.        I. Rekik, S. Elkosantini and H. Chabchoub, Integration of case based reasoning in multi-agent system for the real-time container stacking in seaport terminals, 12th International Conference on Hybrid Artificial Intelligent Systems (HAIS 2017), Spain, 2017

121.        I. Rekik, S. Elkosantini and H. Chabchoub, A case based reasoning based multi-agent system for the reactive container stacking in seaport terminals, The International Conference on Computational Science, Switzerland, 2017.

122.        Lotfi Hidri, Mohamed Labidi (2016), “Optimal physicians schedule in an Intensive Care Unit”, Book Series: IOP Conference Series-Materials Science and Engineering, Volume: 131. (ISI paper Conference).

123.        Ahmad, A., Darmoul, S., Dabwan, A., Alkahtani, M., Samman, S. (2016). Human Error in Multitasking Environments. Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, March 8-10, 2016, 978-1-4673-7762-1/16/$31.00 ©2016 IEEE

124.        Alkahtani, M., El-Sherbeeny, A.; Fawaz M. Abdullah, “Assessing Engineering Minorities in Saudi Arabian Higher Education: Status and Challenges”, Proceedings of the International Conference on Industrial Engineering and Operations Management Rabat, Morocco, April 11-13, 2017.

125.        Ahmed M. El-Sherbeeny and Mohammed Alkahtani, James V. Odom, James E. Smith, “The Partial Cartoon Central Vision Compensation Technique: Subjective Evaluation”, Proceedings of the International Conference on Industrial Engineering and Operations Management Rabat, Morocco, April 11-13, 2017.